{"title":"Kits","description":"Complete Pro-Tec engine protection kits — the same products and processes we use in our workshop.","products":[{"product_id":"pro-tec-carbon-x-p4650-virzula-gredzenu-atkoksesanas-komplekts-2k","title":"Pro-Tec Carbon X P4650 – Two-Component Piston Ring Decarbonizing Kit","description":"\u003cp\u003e2-component product for cleaning piston rings, combustion chambers, EGR systems, intake ports, turbochargers and other parts in petrol and diesel engines.\u003c\/p\u003e\n\u003ch3\u003eK1 component\u003c\/h3\u003e\n\u003cp\u003eThe cleaning foam is a specially formulated, high-performance solution that dissolves and removes burnt-on oil, carbon and other deposits from the combustion chamber.\u003c\/p\u003e\n\u003cp\u003eThe product dissolves carbon deposits in the cylinder head area, particularly on the valves, piston crown, upper piston area and around the first piston ring.\u003c\/p\u003e\n\u003cp\u003eIt also cleans the intake and exhaust valve seats when they are open.\u003c\/p\u003e\n\u003cp\u003eSoot deposits on the EGR valve, turbocharger and air intake system are effectively removed. The intake manifold, intake valves and ports can also be cleaned.\u003c\/p\u003e\n\u003cp\u003eCarbon X is compatible with all materials found in the engine and does not damage seals.\u003c\/p\u003e\n\u003ch3\u003eK2 component\u003c\/h3\u003e\n\u003cp\u003eThe neutralizer triggers a chemical reaction that dissolves the previously applied K1 cleaning foam and binds the dissolved deposits.\u003c\/p\u003e\n\u003cp\u003eUsing the Carbon X extractor or another tool capable of suctioning liquid from the cylinder, the resulting emulsion and dissolved deposits can be safely extracted from the combustion chamber.\u003c\/p\u003e\n\u003cp\u003eK2 contains highly effective lubricating additives with exceptionally strong adhesion, which help protect the engine from excessive friction during start-up and reduce increased wear on moving parts.\u003c\/p\u003e\n\u003ch3\u003eDirections for use\u003c\/h3\u003e\n\u003ch4\u003eFor the combustion chamber\u003c\/h4\u003e\n\u003cp\u003eRemove the spark plug, glow plug or injector and insert the probe into the combustion chamber through the opening.\u003c\/p\u003e\n\u003cp\u003eSpray the K1 component. The product expands like assembly foam and spreads into the intake and exhaust ports if they are open.\u003c\/p\u003e\n\u003cp\u003eAs soon as foam starts to emerge from the opening, stop spraying and leave it to work for 15 to 20 minutes. To avoid overdosing, we recommend spraying for no more than about 5 seconds per combustion chamber.\u003c\/p\u003e\n\u003cp\u003eAfter spraying K1, insert the K2 probe and spray a generous amount of the K2 component through the same opening. Allow it to react with the K1 foam until it dissolves, approximately 4 to 5 minutes. Repeat the spraying if necessary.\u003c\/p\u003e\n\u003cp\u003eExtract the resulting emulsion using the Carbon X extractor or another tool capable of suctioning liquid from the cylinder. Repeat the procedure if there is heavy contamination.\u003c\/p\u003e\n\u003cp\u003eAfter cleaning is complete and before reinstalling the removed components, crank the engine without starting it 2 to 3 times for approximately 10 seconds each using the starter to expel all residue.\u003c\/p\u003e\n\u003ch3\u003eFor the EGR system, turbocharger and intake system\u003c\/h3\u003e\n\u003cp\u003eThe product can be applied with the parts installed or removed, depending on access.\u003c\/p\u003e\n\u003cp\u003eDisconnect the intake and exhaust lines from the EGR valve or turbocharger, or open the intake system between the air filter housing and throttle valve.\u003c\/p\u003e\n\u003cp\u003eSpray the K1 component into all areas. As soon as foam starts to emerge from all access points, stop spraying and leave it to work for approximately 15 to 20 minutes.\u003c\/p\u003e\n\u003cp\u003eThen dissolve the K1 foam with the K2 component, flushing the EGR valve, turbocharger or intake line several times.\u003c\/p\u003e\n\u003cp\u003eAfter reassembling the parts, run the engine for at least 20 minutes as a test.\u003c\/p\u003e\n\u003ch3\u003eInformation\u003c\/h3\u003e\n\u003cp\u003eSuitable for petrol and diesel engines.\u003c\/p\u003e\n\u003cp\u003eConsumption: 500 ml for 4 to 8 cylinders, depending on cylinder capacity, or for 2 to 4 EGR valves, turbochargers or intake systems.\u003c\/p\u003e\n\u003cp\u003eApplication time: 15 to 20 minutes.\u003c\/p\u003e\n\u003cp\u003eThis is a professional application requiring advanced technical knowledge.\u003c\/p\u003e\n\u003cp\u003eWhen using CARBON X to decarbonize piston rings, the engine oil system must be flushed after the procedure using Engine Flush P1001. This helps dissolve residual carbon and other contaminants in the piston ring area by acting from underneath the piston.\u003c\/p\u003e\n\u003cp\u003eAfter the Engine Flush procedure, using Oil Booster P1301 is also recommended.\u003c\/p\u003e\n\u003cp\u003eRead more on the blog: Why is intake system cleaning necessary? An engine cleaning solution, or a deeper understanding of piston rings\u003c\/p\u003e","brand":"Pro-Tec","offers":[{"title":"Default Title","offer_id":58783738200396,"sku":"P4650","price":48.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/1-1.png?v=1789320622"},{"product_id":"pro-tec-dizela-aizsardziba-komplekts-p1001-p1301-p1241","title":"Pro-Tec Diesel Protection Kit (P1001 + P1301 + P1241)","description":"\u003ch3\u003eDiesel protection – Pro-Tec 3-product kit for cleaning and protecting the lubrication and fuel systems\u003c\/h3\u003e\n\u003cp\u003eEngine Flush (EF P1001) + Oil Booster (OB P1301) + Diesel System Super Clean (DSSC P1241)\u003c\/p\u003e\n\u003cp\u003eThis Pro-Tec kit provides complete care for the engine lubrication and fuel systems in one solution. The kit includes products that help clean the lubrication system before an oil change, provide additional protection for the engine lubrication system, and help keep the fuel supply system cleaner.\u003c\/p\u003e\n\u003cp\u003eThe kit is designed for diesel engines, including vehicles with Common Rail systems and turbochargers. The products are used in sequence: first, cleaning the lubrication system; then, providing additional protection for the engine lubrication system; and finally, cleaning the fuel system.\u003c\/p\u003e\n\u003cp\u003eThe kit is particularly suitable for vehicles with high mileage or intensive use, where reliable lubrication, a clean fuel supply, and smooth engine operation are important.\u003c\/p\u003e\n\u003ch3\u003e1. Engine Flush | Pro-Tec EF P1001 | Engine Flush\u003c\/h3\u003e\n\u003ch4\u003eCleaning the engine lubrication system\u003c\/h4\u003e\n\u003cp\u003eThe first step in the kit is cleaning the engine lubrication system before an oil change. Engine Flush helps dissolve and flush out deposits that accumulate in the engine lubrication system during operation.\u003c\/p\u003e\n\u003cp\u003eThe product helps clean oil passages of resinous deposits and oxidation products, as well as prepare the engine for fresh engine oil.\u003c\/p\u003e\n\u003ch4\u003eKey benefits\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003ehelps dissolve deposits in the lubrication system\u003c\/li\u003e\n\n\u003cli\u003ehelps keep oil passages clean\u003c\/li\u003e\n\n\u003cli\u003emay help free piston rings stuck by deposits\u003c\/li\u003e\n\n\u003cli\u003eprepares the engine for fresh engine oil\u003c\/li\u003e\n\n\u003cli\u003emay promote smoother engine operation\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eUse: idle for 15 minutes before changing the oil Dose: 375 ml for up to 6 L of engine oil\u003c\/p\u003e\n\u003ch3\u003e2. Oil Booster | Pro-Tec OB P1301 | Oil additive\u003c\/h3\u003e\n\u003ch4\u003eOil additive for additional protection\u003c\/h4\u003e\n\u003cp\u003eAfter changing the oil, the next step is to add Oil Booster to the fresh engine oil. The product helps reduce friction between engine metal components and promotes stable oil film performance under different operating conditions.\u003c\/p\u003e\n\u003cp\u003eIt provides additional protection against mechanical wear and may help improve the smoothness of engine operation.\u003c\/p\u003e\n\u003ch4\u003eKey benefits\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003ehelps reduce friction between engine components\u003c\/li\u003e\n\n\u003cli\u003epromotes stable oil film performance\u003c\/li\u003e\n\n\u003cli\u003ehelps reduce mechanical wear\u003c\/li\u003e\n\n\u003cli\u003emay promote quieter engine operation\u003c\/li\u003e\n\n\u003cli\u003eprovides additional protection between service intervals\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eUse: add to fresh engine oil after an oil change Dose: 375 ml for approximately 8 L of engine oil\u003c\/p\u003e\n\u003ch3\u003e3. Diesel System Super Clean | Pro-Tec DSSC P1241 | Diesel fuel system cleaner\u003c\/h3\u003e\n\u003ch4\u003eCleaning the diesel fuel system\u003c\/h4\u003e\n\u003cp\u003eThe final step in the kit is cleaning the fuel system. Diesel System Super Clean helps dissolve deposits and resin in the fuel supply system.\u003c\/p\u003e\n\u003cp\u003eThe product helps clean fuel injectors and improve fuel atomisation, which may promote smoother engine operation.\u003c\/p\u003e\n\u003ch4\u003eKey benefits\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003ehelps clean fuel injectors\u003c\/li\u003e\n\n\u003cli\u003epromotes more even fuel atomisation\u003c\/li\u003e\n\n\u003cli\u003emay help reduce deposit formation in the fuel system\u003c\/li\u003e\n\n\u003cli\u003emay promote more stable engine operation\u003c\/li\u003e\n\n\u003cli\u003ehelps keep the fuel system cleaner as part of regular preventive maintenance\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eUse: add to the fuel tank before refuelling Dose: 375 ml for up to 80 L of diesel fuel\u003c\/p\u003e\n\u003ch3\u003eWhy choose this kit?\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003ecare for the engine lubrication and fuel systems in one kit\u003c\/li\u003e\n\n\u003cli\u003esuitable for both new and high-mileage vehicles\u003c\/li\u003e\n\n\u003cli\u003ehelps keep the engine running cleaner\u003c\/li\u003e\n\n\u003cli\u003emay help reduce mechanical wear\u003c\/li\u003e\n\n\u003cli\u003esuitable for regular preventive maintenance\u003c\/li\u003e\n\n\u003cli\u003ea professional solution also available to private users\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eProducts are also available for purchase individually here:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eOil Booster | Pro-Tec OB P1301 | Oil additive\u003c\/li\u003e\n\n\u003cli\u003eDiesel System Super Clean | Pro-Tec DSSC P1241 | Diesel fuel system cleaner\u003c\/li\u003e\n\n\u003cli\u003eEngine Flush | Pro-Tec EF P1001 | Engine Flush\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Pro-Tec","offers":[{"title":"Default Title","offer_id":58783738364236,"sku":"P1001","price":57.23,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/2-1.webp?v=1789320627"},{"product_id":"pro-tec-dizela-dzineja-aizsardziba-komplekts-p1001-p9201-p1241","title":"Pro-Tec Diesel Engine Protection Kit (P1001 + P9201 + P1241)","description":"\u003ch3\u003eDiesel Engine Protection – Pro-Tec engine lubrication and diesel fuel system care kit\u003c\/h3\u003e\n\u003cp\u003eEngine Flush (EF P1001) + Nano Engine Protect \u0026amp; Seal (NEPS P9201) + Diesel System Super Clean (DSSC P1241)\u003c\/p\u003e\n\u003cp\u003eComprehensive care for the engine lubrication and diesel fuel systems in one Pro-Tec kit.\u003c\/p\u003e\n\u003cp\u003eThis kit is designed as a professional maintenance cycle for diesel engines. The products are used in sequence: first, the lubrication system is cleaned, then additional protection is added to the engine lubrication system, and finally, the diesel fuel system is cleaned.\u003c\/p\u003e\n\u003cp\u003eThe kit is especially suitable for vehicles with higher mileage or more intensive use, where reliable lubrication, clean fuel delivery and smooth engine operation are important. It is also suitable for turbo diesel engines and Common Rail injection systems.\u003c\/p\u003e\n\u003ch3\u003e1. Engine Flush | Pro-Tec EF P1001 | Engine flush\u003c\/h3\u003e\n\u003ch4\u003eCleaning the engine’s internal lubrication system\u003c\/h4\u003e\n\u003cp\u003eThe first step in the kit is to clean the engine lubrication system before changing the oil. Engine Flush helps dissolve and flush out deposits that build up in the engine lubrication system during operation.\u003c\/p\u003e\n\u003cp\u003eThe product helps clean oil passages of resinous deposits and oxidation products, and prepares the engine for fresh engine oil.\u003c\/p\u003e\n\u003ch4\u003eKey benefits\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003ehelps dissolve deposits in the lubrication system\u003c\/li\u003e\n\n\u003cli\u003ehelps keep oil passages clean\u003c\/li\u003e\n\n\u003cli\u003emay help free piston rings stuck by deposits\u003c\/li\u003e\n\n\u003cli\u003eprepares the engine for fresh engine oil\u003c\/li\u003e\n\n\u003cli\u003emay help promote smoother engine operation\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eApplication: idle for 15 minutes before changing the oil Dose: 375 ml for up to 6 L of engine oil\u003c\/p\u003e\n\u003ch3\u003e2. Nano Engine Protect \u0026amp; Seal | Pro-Tec NEPS P9201 | High-performance oil additive\u003c\/h3\u003e\n\u003ch4\u003eOil additive for extra protection\u003c\/h4\u003e\n\u003cp\u003eAfter changing the oil, the next step is to add Nano Engine Protect \u0026amp; Seal to the fresh engine oil. The product helps reduce friction between engine metal components and supports stable oil film performance under various operating conditions.\u003c\/p\u003e\n\u003cp\u003eIt provides extra protection against mechanical wear and may help improve engine smoothness.\u003c\/p\u003e\n\u003ch4\u003eKey benefits\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003ehelps reduce friction between engine components\u003c\/li\u003e\n\n\u003cli\u003esupports stable oil film performance\u003c\/li\u003e\n\n\u003cli\u003ehelps reduce mechanical wear\u003c\/li\u003e\n\n\u003cli\u003emay help promote quieter engine operation\u003c\/li\u003e\n\n\u003cli\u003eprovides extra protection between service intervals\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eApplication: add to fresh engine oil after an oil change Dose: 375 ml for approximately 6–8 L of engine oil\u003c\/p\u003e\n\u003ch3\u003e3. Diesel System Super Clean | Pro-Tec DSSC P1241 | Diesel fuel system cleaner\u003c\/h3\u003e\n\u003ch4\u003eCleaning the diesel fuel system\u003c\/h4\u003e\n\u003cp\u003eThe final step in the kit is to clean the fuel system. Diesel System Super Clean helps dissolve deposits and resin in the fuel delivery system.\u003c\/p\u003e\n\u003cp\u003eThe product helps clean fuel injectors and improve fuel atomization, which may promote smoother engine operation.\u003c\/p\u003e\n\u003ch4\u003eKey benefits\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003ehelps clean fuel injectors\u003c\/li\u003e\n\n\u003cli\u003epromotes more even fuel atomization\u003c\/li\u003e\n\n\u003cli\u003emay help reduce deposit formation in the fuel system\u003c\/li\u003e\n\n\u003cli\u003emay help promote more stable engine operation\u003c\/li\u003e\n\n\u003cli\u003ehelps keep the fuel system cleaner as part of regular preventive maintenance\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eApplication: add to the fuel tank before refuelling Dose: 375 ml for up to 80 L of diesel fuel\u003c\/p\u003e\n\u003ch3\u003eWhy choose this kit?\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eengine lubrication and fuel system care in one kit\u003c\/li\u003e\n\n\u003cli\u003esuitable for both newer and higher-mileage vehicles\u003c\/li\u003e\n\n\u003cli\u003ehelps keep the engine running cleaner\u003c\/li\u003e\n\n\u003cli\u003emay help reduce mechanical wear\u003c\/li\u003e\n\n\u003cli\u003esuitable for regular preventive maintenance\u003c\/li\u003e\n\n\u003cli\u003ea professional solution also available to private users\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eIndividual products are available here:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eNano Engine Protect \u0026amp; Seal | Pro-Tec NEPS P9201 | High-performance oil additive\u003c\/li\u003e\n\n\u003cli\u003eDiesel System Super Clean | Pro-Tec DSSC P1241 | Diesel fuel system cleaner\u003c\/li\u003e\n\n\u003cli\u003eEngine Flush | Pro-Tec EF P1001 | Engine flush\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Pro-Tec","offers":[{"title":"Default Title","offer_id":58783739085132,"sku":"P1001","price":60.72,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/3-1.webp?v=1789320632"},{"product_id":"pro-tec-benzina-dzineja-aizsardziba-komplekts-p1001-p1301-p1101","title":"Pro-Tec Petrol Engine Protection Kit (P1001 + P1301 + P1101)","description":"\u003ch3\u003ePetrol Engine Protection – Pro-Tec Engine Lubrication and Fuel System Care Kit\u003c\/h3\u003e\n\u003cp\u003eEngine Flush (EF P1001) + Oil Booster (OB P1301) + Fuel Line Cleaner (FLC P1101)\u003c\/p\u003e\n\u003cp\u003eComplete care for the engine, lubrication system and fuel system in one Pro-Tec kit. The included products help clean the lubrication system before an oil change, provide additional protection for the engine lubrication system and help keep the fuel delivery system cleaner.\u003c\/p\u003e\n\u003cp\u003eThe kit is designed for petrol engines, including cars with direct injection systems and turbocharged engines. The products are used in sequence: first, clean the lubrication system; then provide additional protection for the engine lubrication system; and finally, clean the fuel system.\u003c\/p\u003e\n\u003cp\u003eThe kit is particularly suitable for cars with higher mileage or more intensive use, where reliable lubrication, clean fuel delivery and smooth engine operation are important.\u003c\/p\u003e\n\u003ch3\u003e1. Engine Flush | Pro-Tec EF P1001 | Engine Flush\u003c\/h3\u003e\n\u003ch4\u003eCleaning the engine’s internal lubrication system\u003c\/h4\u003e\n\u003cp\u003eThe first step in the kit is to clean the lubrication system before changing the oil. Engine Flush helps dissolve and flush out resinous deposits, sludge and other residues that build up in the lubrication system during use.\u003c\/p\u003e\n\u003cp\u003eThe product helps prepare the engine for fresh motor oil and promotes cleaner operation of the lubrication system.\u003c\/p\u003e\n\u003ch4\u003eKey benefits\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003ehelps dissolve and flush out deposits in the lubrication system\u003c\/li\u003e\n\n\u003cli\u003emay help free piston rings stuck in deposits\u003c\/li\u003e\n\n\u003cli\u003ehelps keep oil passages clean\u003c\/li\u003e\n\n\u003cli\u003eprepares the engine for fresh motor oil\u003c\/li\u003e\n\n\u003cli\u003emay promote smoother engine operation\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eUse: idle for 15 minutes before changing the oil. Dosage: 375 ml for up to 6 L of motor oil\u003c\/p\u003e\n\u003ch3\u003e2. Oil Booster | Pro-Tec OB P1301 | Oil Additive\u003c\/h3\u003e\n\u003cp\u003eOil additive for reduced friction and additional protection\u003c\/p\u003e\n\u003cp\u003eAfter changing the oil, the next step is to add Oil Booster to the fresh motor oil. The product helps reduce friction between engine parts and promotes more stable oil film performance under varying load and temperature conditions.\u003c\/p\u003e\n\u003ch4\u003eKey benefits\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003ehelps reduce friction and mechanical wear\u003c\/li\u003e\n\n\u003cli\u003epromotes more stable oil film performance under load\u003c\/li\u003e\n\n\u003cli\u003emay help reduce mechanical engine noise\u003c\/li\u003e\n\n\u003cli\u003eprovides additional protection between service intervals\u003c\/li\u003e\n\n\u003cli\u003esuitable for engines with higher mileage or under heavier loads\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eUse: add to fresh motor oil after an oil change. Dosage: 375 ml for up to 8 L of motor oil\u003c\/p\u003e\n\u003ch3\u003e3. Fuel Line Cleaner | Pro-Tec FLC P1101 | Petrol Fuel System Cleaner\u003c\/h3\u003e\n\u003ch4\u003eCleaning the petrol fuel system\u003c\/h4\u003e\n\u003cp\u003eThe final step in the kit is to clean the fuel system. Fuel Line Cleaner helps dissolve deposits and resin in the fuel delivery system, including fuel lines and injectors.\u003c\/p\u003e\n\u003cp\u003eThe product helps maintain more even fuel atomisation and steadier engine operation.\u003c\/p\u003e\n\u003ch4\u003eKey benefits\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003ehelps clean the fuel delivery system and injectors\u003c\/li\u003e\n\n\u003cli\u003epromotes more even fuel atomisation\u003c\/li\u003e\n\n\u003cli\u003emay help reduce deposit formation in the fuel system\u003c\/li\u003e\n\n\u003cli\u003emay promote steadier engine operation\u003c\/li\u003e\n\n\u003cli\u003ehelps keep the fuel system cleaner with regular preventive maintenance\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eUse: add to the fuel tank before refuelling. Dosage: 375 ml for up to 80 L of petrol\u003c\/p\u003e\n\u003ch3\u003eWhy choose this kit?\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eengine lubrication and fuel system care in one kit\u003c\/li\u003e\n\n\u003cli\u003esuitable for both new cars and cars with higher mileage\u003c\/li\u003e\n\n\u003cli\u003ehelps keep the engine running cleaner\u003c\/li\u003e\n\n\u003cli\u003emay help reduce mechanical wear\u003c\/li\u003e\n\n\u003cli\u003esuitable for regular preventive maintenance\u003c\/li\u003e\n\n\u003cli\u003ea professional solution also available to private users\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eProducts are also available to purchase separately here:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eOil Booster | Pro-Tec OB P1301 | Oil Additive\u003c\/li\u003e\n\n\u003cli\u003eFuel Line Cleaner | Pro-Tec FLC P1101 | Petrol Fuel System Cleaner\u003c\/li\u003e\n\n\u003cli\u003eEngine Flush | Pro-Tec EF P1001 | Engine Flush\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Pro-Tec","offers":[{"title":"Default Title","offer_id":58783739248972,"sku":"P1001","price":54.8,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/4-1.webp?v=1789320637"},{"product_id":"pro-tec-benzina-dzineja-aizsardziba-komplekts-p1001-p9201-p1101","title":"Pro-Tec Petrol Engine Protection Kit (P1001 + P9201 + P1101)","description":"\u003ch3\u003ePetrol Engine Protection – Pro-Tec Kit for Engine Lubrication and Fuel System Care\u003c\/h3\u003e\n\u003cp\u003eEngine Flush (EF P1001) + Nano Engine Protect \u0026amp; Seal (NEPS P9201) + Fuel Line Cleaner (FLC P1101)\u003c\/p\u003e\n\u003cp\u003eThis Pro-Tec kit provides a care cycle for the engine’s internal systems — starting with cleaning the lubrication system, followed by additional protection for the lubrication system, and finishing with cleaning the fuel system. The three products are used in sequence and complement one another, helping keep the lubrication and fuel systems cleaner and promoting more stable engine performance.\u003c\/p\u003e\n\u003cp\u003eThe kit is designed for modern petrol engines with normal oil consumption and relatively low mileage. It can help keep the lubrication and fuel systems cleaner, and may be useful for cars with an unstable idle or contaminated engine systems.\u003c\/p\u003e\n\u003ch3\u003e2. Engine Flush | Pro-Tec EF P1001 | Engine Flush\u003c\/h3\u003e\n\u003cp\u003eCleaning the engine lubrication system before an oil change\u003c\/p\u003e\n\u003cp\u003eThe first step in the kit is cleaning the engine lubrication system. Engine Flush helps dissolve and flush out resins, sludge and deposits that build up in oil passages and on internal engine components during operation.\u003c\/p\u003e\n\u003cp\u003eThe product may help free piston rings stuck in deposits and prepare the engine for fresh engine oil.\u003c\/p\u003e\n\u003ch4\u003eKey benefits\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003ehelps dissolve and flush out deposits accumulated in the oil system\u003c\/li\u003e\n\n\u003cli\u003emay help free coked-up piston rings\u003c\/li\u003e\n\n\u003cli\u003eprepares the engine for fresh engine oil\u003c\/li\u003e\n\n\u003cli\u003ehelps keep oil passages clean\u003c\/li\u003e\n\n\u003cli\u003emay promote smoother engine operation\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eDirections: Run the engine at idle for approximately 15 minutes before changing the oil. Dosage: 375 ml for up to 6 L of engine oil.\u003c\/p\u003e\n\u003ch3\u003e2. Nano Engine Protect \u0026amp; Seal | Pro-Tec NEPS P9201 | High-Performance Oil Additive\u003c\/h3\u003e\n\u003ch4\u003eAdditional protection for the lubrication system\u003c\/h4\u003e\n\u003cp\u003eThe second step in the kit is providing additional protection for the engine lubrication system. Nano Engine Protect \u0026amp; Seal is an oil additive that helps reduce friction between metal engine components and promotes a more stable oil film.\u003c\/p\u003e\n\u003cp\u003eThe product helps reduce mechanical wear and provides additional protection under various engine operating conditions.\u003c\/p\u003e\n\u003ch4\u003eKey benefits\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003ehelps reduce friction between engine components\u003c\/li\u003e\n\n\u003cli\u003epromotes a more stable oil film\u003c\/li\u003e\n\n\u003cli\u003ehelps reduce mechanical wear\u003c\/li\u003e\n\n\u003cli\u003emay promote smoother engine operation\u003c\/li\u003e\n\n\u003cli\u003eprovides additional protection between service intervals\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eDirections: Add to fresh engine oil after an oil change. Dosage: 375 ml for up to 6 L of engine oil.\u003c\/p\u003e\n\u003ch3\u003e3. Fuel Line Cleaner | Pro-Tec FLC P1101 | Petrol System Cleaner\u003c\/h3\u003e\n\u003ch4\u003eFuel delivery system cleaning\u003c\/h4\u003e\n\u003cp\u003eThe final step is cleaning the fuel system. Fuel Line Cleaner helps dissolve deposits and resins in the fuel delivery system, including fuel lines and injectors.\u003c\/p\u003e\n\u003cp\u003eThe product helps maintain more even fuel atomisation and more stable engine operation.\u003c\/p\u003e\n\u003ch4\u003eKey benefits\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003ehelps clean fuel injectors and the fuel delivery system\u003c\/li\u003e\n\n\u003cli\u003epromotes more even fuel atomisation\u003c\/li\u003e\n\n\u003cli\u003emay help reduce deposit formation in the fuel system\u003c\/li\u003e\n\n\u003cli\u003emay promote more stable engine operation\u003c\/li\u003e\n\n\u003cli\u003esuitable for regular preventive fuel system maintenance\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eDirections: Add to the fuel tank before filling up. Dosage: 375 ml for up to 80 L of fuel.\u003c\/p\u003e\n\u003ch3\u003eWhy choose this kit?\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eengine care cycle: lubrication system + fuel system\u003c\/li\u003e\n\n\u003cli\u003esuitable for both new and higher-mileage engines\u003c\/li\u003e\n\n\u003cli\u003ehelps keep the engine and fuel systems cleaner\u003c\/li\u003e\n\n\u003cli\u003emay help reduce long-term wear\u003c\/li\u003e\n\n\u003cli\u003esuitable for regular preventive maintenance\u003c\/li\u003e\n\n\u003cli\u003ea professional solution also available to private users\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eProducts are also available individually here:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eNano Engine Protect \u0026amp; Seal | Pro-Tec NEPS P9201 | High-Performance Oil Additive\u003c\/li\u003e\n\n\u003cli\u003eFuel Line Cleaner | Pro-Tec FLC P1101 | Petrol System Cleaner\u003c\/li\u003e\n\n\u003cli\u003eEngine Flush | Pro-Tec EF P1001 | Engine Flush\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Pro-Tec","offers":[{"title":"Default Title","offer_id":58783739445580,"sku":"P1001","price":58.27,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/5-1.webp?v=1789320641"},{"product_id":"korozijas-apstrades-komplekts-owatrol-oil-500ml-brantho-korrux-3-in-1-750ml-antracits","title":"Corrosion treatment kit: Owatrol Oil 500 ml + Brantho-Korrux “3 in 1” 750 ml (anthracite)","description":"\u003ch3\u003eProfessional two-step corrosion treatment system — reliable protection for restoring parts.\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOwatrol Oil | Clear universal rust stabiliser, 500 ml A deep-penetrating rust stabiliser that displaces moisture and air from the pores of the metal, stopping oxidation. It does not restore the metal’s chemical structure, but stabilises rust from within, forming a flexible, waterproof base coat with excellent adhesion for subsequent coatings. Compatible with oil-based and synthetic coatings; dries in 12–48 h; surface ready for the next coat. Ideal for both light and intensive rust treatment, including complex and hard-to-reach areas.\u003c\/li\u003e\n\n\u003cli\u003eBrantho-Korrux “3 in 1” | Industrial coating, 750 ml, RAL 7016 (anthracite grey) A single-component system that serves as a primer, intermediate coat and topcoat. Its high solids content provides a thicker, flexible layer that protects against UV radiation, salt water, moisture and chemical exposure. ComfortDose aerosol technology, excellent coverage, temperature resistance up to +175°C. Provides long-lasting mechanical durability and protects metal against cracking and peeling, even in harsh outdoor conditions.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eInstructions for use: corrosion treatment\u003c\/h3\u003e\n\u003cp\u003eSurface preparation: remove loose rust, dirt, grease and oil, leaving a rough surface for optimal mechanical adhesion. Degrease with a solvent and allow to dry completely; remove any old paint residue if necessary.\u003c\/p\u003e\n\u003cp\u003eStep 1 — Owatrol Oil: apply evenly from a distance of 20–30 cm, using light overlapping passes; apply a second coat to particularly porous rust. Drying time: 12–48 h; the surface should be tacky before applying the next coat.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Brantho-Korrux “3 in 1”: make sure the Owatrol Oil is completely dry. Apply 2–3 thin coats or 1–2 coats, as recommended by the manufacturer; allow each coat to dry before applying the next.\u003c\/p\u003e\n\u003cp\u003eImportant: Owatrol Oil and Brantho-Korrux 3in1 are fully compatible materials in this combination, but due to their flexible properties, applying filler over this coating is not recommended.\u003c\/p\u003e\n\u003cp\u003eOnce fully dry, Owatrol Oil and Brantho‑Korrux 3in1 provide a stable surface ready for further coatings, onto which most commercially available paints can be safely applied. If necessary, Brantho‑Korrux 3in1 can be applied in multiple coats without first abrading the surface.\u003c\/p\u003e\n\u003ch3\u003eLong-term protection\u003c\/h3\u003e\n\u003cp\u003eOwatrol Oil stabilises rust and provides moisture resistance, while Brantho-Korrux “3 in 1” protects against UV radiation, salt water and mechanical stress. Ideal for vehicle chassis, industrial equipment and outdoor metal structures. Provides a flexible, crack-resistant, durable coating with long-lasting protection, even in harsh weather conditions.\u003c\/p\u003e\n\u003cp\u003eAdditional benefit: reduces the need for regular repeat rust treatment, saving time and resources.\u003c\/p\u003e\n\u003ch3\u003eCertification and testing\u003c\/h3\u003e\n\u003cp\u003eBrantho-Korrux 3in1 and Owatrol Oil have been thoroughly tested and certified in accordance with international standards and industry requirements.\u003c\/p\u003e\n\u003ch3\u003eSafety, storage and maintenance\u003c\/h3\u003e\n\u003cp\u003eWear gloves and safety goggles, and ensure adequate ventilation; avoid open flames and heat. Store in a cool, dry place away from direct sunlight and heat. Inspect the coating after each season or exposure to mechanical stress; clean damaged areas and apply another coat.\u003c\/p\u003e\n\u003ch3\u003eKit contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e1 x Owatrol Oil, 500 ml\u003c\/li\u003e\n\n\u003cli\u003e1 x Brantho-Korrux “3 in 1”, 750 ml, RAL 7016 (anthracite grey)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eOfficial product websites: Brantho-Korrux „3 in 1“ and OWATROL OIL\u003c\/p\u003e","brand":"Owatrol","offers":[{"title":"Default Title","offer_id":58783739674956,"sku":"733DE\/GB","price":58.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/6-1.webp?v=1789320645"},{"product_id":"korozijas-apstrades-komplekts-owatrol-oil-500ml-brantho-korrux-3-in-1-750ml-melns","title":"Corrosion Treatment Kit: Owatrol Oil 500 ml + Brantho-Korrux “3 in 1” 750 ml (black)","description":"\u003ch3\u003eCorrosion Treatment Kit: Owatrol Oil 500ml + Brantho-Korrux “3 in 1” 750ml (black)\u003c\/h3\u003e\n\u003ch3\u003eProfessional two-step corrosion treatment system — reliable protection for restoring parts.\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eOwatrol Oil | Colourless universal rust stabiliser, 500 ml. A deeply penetrating rust stabiliser that displaces moisture and air from the pores of the metal, halting oxidation. It does not restore the metal’s chemical structure, but consolidates rust from within, forming a flexible, waterproof base layer with excellent adhesion for subsequent coatings. Compatible with oil-based and synthetic coatings; dries in 12–48 h; the surface is ready for the next coat. Ideal for both light and intensive rust treatment, including in complex and hard-to-reach areas.\u003c\/li\u003e\n\n\u003cli\u003eBrantho-Korrux “3 in 1” | Industrial coating, 750 ml, RAL 9005 (jet black). A single-component system that works as a primer, intermediate coat and topcoat. Its high solids content provides a thicker, flexible coating that protects against UV, salt water, moisture and chemical exposure. Comfort-dose aerosol technology, excellent coverage, temperature resistance up to +175°C. Provides long-lasting mechanical durability and protects metal against cracking and peeling, even in harsh outdoor conditions.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eInstructions for use\u003c\/h3\u003e\n\u003cp\u003eSurface preparation: remove loose rust, dirt, grease and oil, leaving a rough surface for optimum mechanical adhesion. Degrease with solvent and allow to dry completely; remove any old paint residue if necessary.\u003c\/p\u003e\n\u003cp\u003eStep 1 — Owatrol Oil: apply evenly from a distance of 20–30 cm, using light overlapping passes; apply a second coat to particularly porous rust. Drying time: 12–48 h; the surface should be tacky before applying the next coat.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Brantho-Korrux “3 in 1”: make sure the Owatrol Oil has dried completely. Apply 2–3 thin coats or 1–2 coats in accordance with the manufacturer’s recommendations; allow each coat to dry before applying the next.\u003c\/p\u003e\n\u003cp\u003eImportant: Owatrol Oil and Brantho-Korrux 3in1 are fully compatible materials in this combination, but due to their flexible properties, applying filler over this coating is not recommended.\u003c\/p\u003e\n\u003cp\u003eOnce fully dry, Owatrol Oil and Brantho‑Korrux 3in1 provide a stable, adhesion-ready surface onto which most commercially available paints can be safely applied. If necessary, Brantho‑Korrux 3in1 can be applied in several coats without first abrading the surface.\u003c\/p\u003e\n\u003ch3\u003eLong-term protection\u003c\/h3\u003e\n\u003cp\u003eOwatrol Oil stabilises rust and provides moisture resistance, while Brantho-Korrux “3 in 1” protects against UV, salt water and mechanical stress. Ideal for vehicle chassis, industrial equipment and outdoor metal structures. Provides a flexible, crack-resistant and durable coating that delivers long-lasting protection, even in harsh weather conditions.\u003c\/p\u003e\n\u003cp\u003eAdditional benefit: reduces the need for regular repeat rust treatment, saving time and resources.\u003c\/p\u003e\n\u003ch3\u003eCertification and testing\u003c\/h3\u003e\n\u003cp\u003eBrantho-Korrux 3in1 and Owatrol Oil have been thoroughly tested and certified in accordance with international standards and industry requirements.\u003c\/p\u003e\n\u003ch3\u003eSafety, storage and maintenance\u003c\/h3\u003e\n\u003cp\u003eUse gloves and safety glasses, and ensure adequate ventilation; avoid open flames and heat. Store in a cool, dry place away from direct sunlight and heat. Inspect the coating after each season or exposure to mechanical stress; clean damaged areas and apply another coat.\u003c\/p\u003e\n\u003ch3\u003eKit contents\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003e1 x Owatrol Oil, 500 ml\u003c\/li\u003e\n\n\u003cli\u003e1 x Brantho-Korrux “3 in 1”, 750 ml, RAL 9005 (jet black)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eOfficial product websites: Brantho-Korrux “3 in 1” and OWATROL OIL\u003c\/p\u003e","brand":"Owatrol","offers":[{"title":"Default Title","offer_id":58783740166476,"sku":"732DE\/GB-1","price":58.1,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/7-1.webp?v=1789320649"},{"product_id":"korozijas-apstrades-komplekts-xl-owatrol-oil-1l-brantho-korrux-3-in-1-750ml-x2-antracits","title":"Corrosion Treatment Kit XL: Owatrol Oil 1L + Brantho-Korrux “3 in 1” 750ml x2 (anthracite)","description":"\u003ch3\u003eCorrosion treatment kit: Owatrol Oil 1L + Brantho-Korrux “3 in 1” 750ml (anthracite) X2\u003c\/h3\u003e\n\u003ch3\u003eProfessional two-step corrosion treatment system — for large-scale projects and intensive surface treatment.\u003c\/h3\u003e\n\u003cp\u003eOwatrol Oil | Colourless all-purpose rust stabiliser, 1 L A deeply penetrating rust stabiliser that displaces moisture and air from metal pores, stopping oxidation. It does not restore the metal’s chemical structure, but strengthens rust from within, forming a flexible, waterproof base layer with excellent adhesion for subsequent coatings. Compatible with oil-based and synthetic coatings; dries in 12–48 hours; surface ready for the next layer. Ideal for both light and intensive rust treatment, including hard-to-reach and complex areas.\u003c\/p\u003e\n\u003cp\u003eBrantho-Korrux “3 in 1” | Industrial coating, 750 ml, RAL 7016 (anthracite grey) x2 A single-component system that serves as a primer, intermediate coat and topcoat. Its high solids content provides a thicker, flexible layer that protects against UV, salt water, moisture and chemical exposure. Comfort-dose aerosol technology, excellent coverage, temperature resistance up to +175°C. Provides long-lasting mechanical durability and protects metal from cracking and peeling, even in harsh outdoor conditions.\u003c\/p\u003e\n\u003cp\u003eInstructions for use Surface preparation: remove loose rust, dirt, grease and oil, leaving a rough surface for optimal mechanical adhesion. Degrease with solvent and allow to dry completely; remove old paint residue if necessary.\u003c\/p\u003e\n\u003cp\u003eStep 1 — Owatrol Oil: apply evenly from a distance of 20–30 cm, using light overlapping passes; apply a second coat to particularly porous rust. Drying time: 12–48 hours; the surface should be tacky before applying the next layer.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Brantho-Korrux “3 in 1”: make sure the Owatrol Oil has dried completely. Apply 2–3 thin coats or 1–2 coats in accordance with the manufacturer’s recommendations; allow each coat to dry before applying the next.\u003c\/p\u003e\n\u003cp\u003eImportant: Owatrol Oil and Brantho-Korrux 3in1 are fully compatible materials in this combination, but due to their flexible properties, applying filler over this coating is not recommended.\u003c\/p\u003e\n\u003cp\u003eOnce fully dry, Owatrol Oil and Brantho‑Korrux 3in1 provide a stable surface ready for further coating, onto which most commercially available paints can be safely applied. If necessary, Brantho‑Korrux 3in1 can be applied in several coats without first abrading the surface.\u003c\/p\u003e\n\u003cp\u003eLong-term protection Owatrol Oil stabilises rust and resists moisture, while Brantho-Korrux “3 in 1” protects against UV, salt water and mechanical stress. Ideal for vehicle chassis, industrial equipment and outdoor metal structures. Provides a flexible, crack-resistant and durable coating with long-lasting protection, even in harsh weather conditions.\u003c\/p\u003e\n\u003cp\u003eAdditional benefit: reduces the need for regular repeat rust treatment, saving time and resources.\u003c\/p\u003e\n\u003cp\u003eCertification and testing Brantho-Korrux 3in1 and Owatrol Oil have been thoroughly tested and certified in accordance with international standards and industry requirements.\u003c\/p\u003e\n\u003cp\u003eSafety, storage and maintenance Wear gloves and safety goggles, and ensure good ventilation; avoid open flames and heat. Store in a cool, dry place away from direct sunlight and heat. Inspect the coating after each season or exposure to mechanical stress; clean damaged areas and apply another coat.\u003c\/p\u003e\n\u003cp\u003eKit contents 1 x Owatrol Oil, 1 L 1 x Brantho-Korrux “3 in 1”, 750 ml, RAL 7016 (anthracite grey) x2\u003c\/p\u003e\n\u003cp\u003eOfficial product websites: Brantho-Korrux „3 in 1“ and OWATROL OIL\u003c\/p\u003e","brand":"Owatrol","offers":[{"title":"Default Title","offer_id":58783740395852,"sku":"733DE\/GB","price":114.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/8-1.webp?v=1789320654"},{"product_id":"korozijas-apstrades-komplekts-xl-owatrol-oil-1l-brantho-korrux-3-in-1-750ml-x2-melns","title":"XL Corrosion Treatment Kit: Owatrol Oil 1 L + Brantho-Korrux “3 in 1” 750 ml x2 (black)","description":"\u003ch3\u003eCorrosion Treatment Kit: Owatrol Oil 1L + Brantho-Korrux “3 in 1” 750ml (black) X2\u003c\/h3\u003e\n\u003ch3\u003eProfessional two-step corrosion treatment system — for large-scale projects and intensive surface treatment.\u003c\/h3\u003e\n\u003cp\u003eOwatrol Oil | Colourless universal rust stabilizer, 1 L A deeply penetrating rust stabilizer that displaces moisture and air from metal pores, stopping oxidation. It does not restore the metal’s chemical structure, but strengthens rust from within, forming a flexible, waterproof base layer with excellent adhesion for subsequent coatings. Compatible with oil-based and synthetic coatings; dries in 12–48 h; surface is ready for the next coat. Ideal for both light and intensive rust treatment, including complex and hard-to-reach areas.\u003c\/p\u003e\n\u003cp\u003eBrantho-Korrux “3 in 1” | Industrial coating, 750 ml, RAL 9005 (jet black) x2 A single-component system that functions as a primer, intermediate coat and topcoat. Its high solids content provides a thicker, flexible layer that protects against UV, salt water, moisture and chemical exposure. Comfort-dose aerosol technology, excellent coverage, temperature resistance up to +175°C. Provides long-lasting mechanical durability and protects metal against cracking and peeling, even in aggressive outdoor conditions.\u003c\/p\u003e\n\u003cp\u003eInstructions for use Surface preparation: remove loose rust, dirt, grease and oil, leaving a rough surface for optimal mechanical adhesion. Degrease with a solvent and allow to dry completely; remove old paint residues if necessary.\u003c\/p\u003e\n\u003cp\u003eStep 1 — Owatrol Oil: apply evenly from a distance of 20–30 cm, using light, overlapping passes; apply a second coat to particularly porous rust. Drying time: 12–48 h; the surface should be tacky before applying the next coat.\u003c\/p\u003e\n\u003cp\u003eStep 2 — Brantho-Korrux “3 in 1”: make sure the Owatrol Oil has dried completely. Apply 2–3 thin coats or 1–2 coats in accordance with the manufacturer’s recommendations; allow each coat to dry before applying the next.\u003c\/p\u003e\n\u003cp\u003eImportant: Owatrol Oil and Brantho-Korrux 3in1 are fully compatible materials in this combination, but due to their flexible properties, it is not recommended to apply filler over this coating.\u003c\/p\u003e\n\u003cp\u003eOnce fully dry, Owatrol Oil and Brantho‑Korrux 3in1 provide a stable surface with good adhesion, onto which most commercially available paints can be safely applied. If necessary, Brantho‑Korrux 3in1 can be applied in multiple coats without first abrading the surface.\u003c\/p\u003e\n\u003cp\u003eLong-term protection Owatrol Oil stabilizes rust and resists moisture, while Brantho-Korrux “3 in 1” protects against UV, salt water and mechanical stress. Ideal for vehicle chassis, industrial equipment and outdoor metal structures. Provides a flexible, crack-resistant and durable coating with long-lasting protection, even in harsh weather conditions.\u003c\/p\u003e\n\u003cp\u003eAdditional benefit: reduces the need for regular repeat rust treatment, saving time and resources.\u003c\/p\u003e\n\u003cp\u003eCertification and testing Brantho-Korrux 3in1 and Owatrol Oil have been thoroughly tested and certified in accordance with international standards and industry requirements.\u003c\/p\u003e\n\u003cp\u003eSafety, storage and maintenance Use gloves, safety goggles and ensure good ventilation; keep away from open flames and heat. Store in a cool, dry place away from direct sunlight and heat. Inspect the coating after each season or following mechanical impact; clean damaged areas and apply another coat.\u003c\/p\u003e\n\u003cp\u003eKit contents 1 x Owatrol Oil, 1 L 1 x Brantho-Korrux “3 in 1”, 750 ml, RAL 9005 (jet black) x2\u003c\/p\u003e\n\u003cp\u003eOfficial product websites: Brantho-Korrux „3 in 1“ and OWATROL OIL\u003c\/p\u003e","brand":"Owatrol","offers":[{"title":"Default Title","offer_id":58783740559692,"sku":"733DE\/GB","price":114.93,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/9-1.webp?v=1789320658"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/collections\/4-1.webp?v=1791817758","url":"https:\/\/monkeyshop.lv\/en-lv\/collections\/komplekti.oembed","provider":"Monkey Garage","version":"1.0","type":"link"}