{"product_id":"pro-tec-carbon-x-p4650-virzula-gredzenu-atkoksesanas-komplekts-2k","title":"Pro-Tec Carbon X P4650 – Two-Component Piston Ring Decarbonizing Kit","description":"\u003cp\u003e2-component product for cleaning piston rings, combustion chambers, EGR systems, intake ports, turbochargers and other parts in petrol and diesel engines.\u003c\/p\u003e\n\u003ch3\u003eK1 component\u003c\/h3\u003e\n\u003cp\u003eThe cleaning foam is a specially formulated, high-performance solution that dissolves and removes burnt-on oil, carbon and other deposits from the combustion chamber.\u003c\/p\u003e\n\u003cp\u003eThe product dissolves carbon deposits in the cylinder head area, particularly on the valves, piston crown, upper piston area and around the first piston ring.\u003c\/p\u003e\n\u003cp\u003eIt also cleans the intake and exhaust valve seats when they are open.\u003c\/p\u003e\n\u003cp\u003eSoot deposits on the EGR valve, turbocharger and air intake system are effectively removed. The intake manifold, intake valves and ports can also be cleaned.\u003c\/p\u003e\n\u003cp\u003eCarbon X is compatible with all materials found in the engine and does not damage seals.\u003c\/p\u003e\n\u003ch3\u003eK2 component\u003c\/h3\u003e\n\u003cp\u003eThe neutralizer triggers a chemical reaction that dissolves the previously applied K1 cleaning foam and binds the dissolved deposits.\u003c\/p\u003e\n\u003cp\u003eUsing the Carbon X extractor or another tool capable of suctioning liquid from the cylinder, the resulting emulsion and dissolved deposits can be safely extracted from the combustion chamber.\u003c\/p\u003e\n\u003cp\u003eK2 contains highly effective lubricating additives with exceptionally strong adhesion, which help protect the engine from excessive friction during start-up and reduce increased wear on moving parts.\u003c\/p\u003e\n\u003ch3\u003eDirections for use\u003c\/h3\u003e\n\u003ch4\u003eFor the combustion chamber\u003c\/h4\u003e\n\u003cp\u003eRemove the spark plug, glow plug or injector and insert the probe into the combustion chamber through the opening.\u003c\/p\u003e\n\u003cp\u003eSpray the K1 component. The product expands like assembly foam and spreads into the intake and exhaust ports if they are open.\u003c\/p\u003e\n\u003cp\u003eAs soon as foam starts to emerge from the opening, stop spraying and leave it to work for 15 to 20 minutes. To avoid overdosing, we recommend spraying for no more than about 5 seconds per combustion chamber.\u003c\/p\u003e\n\u003cp\u003eAfter spraying K1, insert the K2 probe and spray a generous amount of the K2 component through the same opening. Allow it to react with the K1 foam until it dissolves, approximately 4 to 5 minutes. Repeat the spraying if necessary.\u003c\/p\u003e\n\u003cp\u003eExtract the resulting emulsion using the Carbon X extractor or another tool capable of suctioning liquid from the cylinder. Repeat the procedure if there is heavy contamination.\u003c\/p\u003e\n\u003cp\u003eAfter cleaning is complete and before reinstalling the removed components, crank the engine without starting it 2 to 3 times for approximately 10 seconds each using the starter to expel all residue.\u003c\/p\u003e\n\u003ch3\u003eFor the EGR system, turbocharger and intake system\u003c\/h3\u003e\n\u003cp\u003eThe product can be applied with the parts installed or removed, depending on access.\u003c\/p\u003e\n\u003cp\u003eDisconnect the intake and exhaust lines from the EGR valve or turbocharger, or open the intake system between the air filter housing and throttle valve.\u003c\/p\u003e\n\u003cp\u003eSpray the K1 component into all areas. As soon as foam starts to emerge from all access points, stop spraying and leave it to work for approximately 15 to 20 minutes.\u003c\/p\u003e\n\u003cp\u003eThen dissolve the K1 foam with the K2 component, flushing the EGR valve, turbocharger or intake line several times.\u003c\/p\u003e\n\u003cp\u003eAfter reassembling the parts, run the engine for at least 20 minutes as a test.\u003c\/p\u003e\n\u003ch3\u003eInformation\u003c\/h3\u003e\n\u003cp\u003eSuitable for petrol and diesel engines.\u003c\/p\u003e\n\u003cp\u003eConsumption: 500 ml for 4 to 8 cylinders, depending on cylinder capacity, or for 2 to 4 EGR valves, turbochargers or intake systems.\u003c\/p\u003e\n\u003cp\u003eApplication time: 15 to 20 minutes.\u003c\/p\u003e\n\u003cp\u003eThis is a professional application requiring advanced technical knowledge.\u003c\/p\u003e\n\u003cp\u003eWhen using CARBON X to decarbonize piston rings, the engine oil system must be flushed after the procedure using Engine Flush P1001. This helps dissolve residual carbon and other contaminants in the piston ring area by acting from underneath the piston.\u003c\/p\u003e\n\u003cp\u003eAfter the Engine Flush procedure, using Oil Booster P1301 is also recommended.\u003c\/p\u003e\n\u003cp\u003eRead more on the blog: Why is intake system cleaning necessary? An engine cleaning solution, or a deeper understanding of piston rings\u003c\/p\u003e","brand":"Pro-Tec","offers":[{"title":"Default Title","offer_id":58783738200396,"sku":"P4650","price":48.84,"currency_code":"EUR","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/1-1.png?v=1789320622","url":"https:\/\/monkeyshop.lv\/en-lv\/products\/pro-tec-carbon-x-p4650-virzula-gredzenu-atkoksesanas-komplekts-2k","provider":"Monkey Garage","version":"1.0","type":"link"}