{"title":"Rust protection","description":"Anti-corrosion protection for the bodywork and chassis – Owatrol and Auson Mercasol products for long-lasting corrosion protection.","products":[{"product_id":"owatrol-oil-rusas-stabilizators-300ml-aerosols","title":"Owatrol Oil – Rust Stabilizer, 300 ml Aerosol","description":"\u003ch3\u003eOWATROL® Rust Stabiliser 300ml Spray – Multifunctional Rust Stabiliser and Paint Conditioner for Oil-Based Coatings\u003c\/h3\u003e\n\u003cp\u003eOWATROL® OIL is a highly penetrating, air-drying alkyd oil formulated to prevent rust, improve paint adhesion, and provide long-lasting protection against the elements. It is suitable both as a standalone protective coating and as an additive to oil- and alkyd-based paints, varnishes, and stains.\u003c\/p\u003e\n\u003cp\u003eIts unique formula displaces air and moisture in rust, creating a stable, non-flaking surface that can be safely painted over. OWATROL® OIL also saturates dry, porous wood surfaces with oil, preventing paint from peeling and improving the finish on wood.\u003c\/p\u003e\n\u003ch4\u003eProduct applications\u003c\/h4\u003e\n\u003cp\u003eOWATROL® OIL is suitable for a variety of materials and surfaces:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMetal (rusty or new): steel structures, pipes, railings, equipment, trailers, tanks\u003c\/li\u003e\n\n\u003cli\u003eWood: dry, damaged, porous surfaces, both horizontal and vertical\u003c\/li\u003e\n\n\u003cli\u003eInterior and exterior applications\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003eKey features and benefits\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eCan be applied directly to rust without the need to clean the metal back to bare metal\u003c\/li\u003e\n\n\u003cli\u003ePenetrates deeply into the rust layer, displacing moisture and stopping corrosion\u003c\/li\u003e\n\n\u003cli\u003eForms a stable layer that provides excellent paint adhesion\u003c\/li\u003e\n\n\u003cli\u003eCompatible with oil- and alkyd-based coatings, including urethane alkyd paints\u003c\/li\u003e\n\n\u003cli\u003eImproves paint flow, extends the open time, and enhances adhesion in challenging conditions\u003c\/li\u003e\n\n\u003cli\u003eFills wood pores with oil, preventing paint from peeling and providing long-lasting adhesion\u003c\/li\u003e\n\n\u003cli\u003eWithstands temperatures up to 175°C once fully dry\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003eApplication on metal surfaces\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eRusty metal: Apply wet-on-wet until the surface becomes uniformly glossy. This indicates full saturation. After the first application, check for loose rust flakes; these can be carefully removed and the area touched up with OWATROL® OIL.\u003c\/li\u003e\n\n\u003cli\u003eNew metal: OWATROL® OIL can be used as a primer—one part OWATROL® OIL to three parts alkyd primer, or apply one thin coat undiluted. Once dry, the surface can be painted with paint mixed with OWATROL® OIL.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003eApplication on wood\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eWood in good condition: Prime with a mixture of OWATROL® OIL and paint primer, then apply paint mixed with OWATROL® OIL (usually 5–20% of the paint volume).\u003c\/li\u003e\n\n\u003cli\u003eDamaged or porous wood: Apply several coats wet-on-wet without allowing drying time between coats. Once the wood no longer absorbs the product, wipe off any excess oil and allow it to dry. Continue with a standard paint system, adding OWATROL® OIL.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003ePaint conditioning The product significantly improves the properties of oil-based paints and varnishes:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eExtends the working time with a wet edge\u003c\/li\u003e\n\n\u003cli\u003ePrevents paint from sticking, dragging, and setting too quickly\u003c\/li\u003e\n\n\u003cli\u003eImproves paint flow, allowing for a professional finish even in challenging conditions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003eRecommended mixing ratios with paint\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eTopcoat paint: 5–20% by volume\u003c\/li\u003e\n\n\u003cli\u003ePrimers: up to 30%\u003c\/li\u003e\n\n\u003cli\u003eBase coat (first coat): up to 50%. These ratios can be adjusted on site depending on the condition and porosity of the surface.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical specifications\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eBinder: alkyd\u003c\/li\u003e\n\n\u003cli\u003eSolvent: white spirit\u003c\/li\u003e\n\n\u003cli\u003eSolids content: 49% ±2%\u003c\/li\u003e\n\n\u003cli\u003eDensity: 0.89 ±0.05 at 20°C\u003c\/li\u003e\n\n\u003cli\u003eGloss level: \u0026amp;gt;70%\u003c\/li\u003e\n\n\u003cli\u003eVOC content: up to 489 g\/l\u003c\/li\u003e\n\n\u003cli\u003eDrying time: touch dry 12 h, fully dry 24 h, recoatable after 24–48 h\u003c\/li\u003e\n\n\u003cli\u003eHeat resistance: up to 175°C\u003c\/li\u003e\n\n\u003cli\u003eApplication: by brush, roller, or airless sprayer (recommended tips: 517 or 519)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003ePackaging options Available in various sizes: 300 ml spray, 500 ml, 1 L.\u003c\/p\u003e\n\u003ch4\u003eSafety and storage\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eThe product is not classified as flammable, but oil-soaked cloths may spontaneously combust if not disposed of properly\u003c\/li\u003e\n\n\u003cli\u003eStore in a cool place, avoiding frost and high temperatures\u003c\/li\u003e\n\n\u003cli\u003eDetailed safety information is available on the manufacturer's website: Owatrol\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"Default Title","offer_id":58783744393548,"sku":"730GB","price":27.95,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/product-18-bg-removed.png?v=1791369103"},{"product_id":"owatrol-oil-bezkrasains-universals-rusas-stabilizators-500ml","title":"Owatrol Oil - Clear Universal Rust Stabilizer, 500 ml","description":"\u003cp\u003eMulti-purpose rust stabiliser and paint conditioner for oil-based coatings\u003c\/p\u003e\n\u003cp\u003eOWATROL® OIL is a high-penetration, air-drying alkyd oil formulated to prevent rust, improve paint adhesion and provide long-lasting protection against the elements. The product is suitable both as a standalone protective coating and as an additive for oil- and alkyd-based paints, varnishes and stains.\u003c\/p\u003e\n\u003cp\u003eIts special formula displaces air and moisture in rust, creating a stable, non-flaking surface that can be safely painted over. OWATROL® OIL also saturates dry, porous wood surfaces with oil, preventing paint from peeling and improving the finish on wood.\u003c\/p\u003e\n\u003ch4\u003eProduct applications\u003c\/h4\u003e\n\u003cp\u003eOWATROL® OIL is suitable for a variety of materials and surfaces:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMetal (rusty or new): steel structures, pipes, railings, equipment, trailers, tanks\u003c\/li\u003e\n\n\u003cli\u003eWood: dry, damaged, porous surfaces, both horizontal and vertical\u003c\/li\u003e\n\n\u003cli\u003eInterior and exterior use\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003eKey features and benefits\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eCan be applied directly to rust without needing to clean the metal back to bright metal\u003c\/li\u003e\n\n\u003cli\u003ePenetrates deep into the rust layer, displacing moisture and stopping the corrosion process\u003c\/li\u003e\n\n\u003cli\u003eForms a stable layer that provides excellent adhesion for paint\u003c\/li\u003e\n\n\u003cli\u003eCompatible with oil\/alkyd-based coatings, including urethane alkyd paints\u003c\/li\u003e\n\n\u003cli\u003eImproves paint flow and levelling, extends the wet-edge working time, and improves adhesion in difficult conditions\u003c\/li\u003e\n\n\u003cli\u003eFills wood pores with oil, preventing paint from peeling and providing long-lasting adhesion\u003c\/li\u003e\n\n\u003cli\u003eHeat-resistant up to 175°C once fully dry\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003eApplication on metal surfaces\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eRusty metal: Apply wet-on-wet until the surface becomes uniformly glossy. This indicates full saturation. After the first application, check for any loose flakes of rust; carefully remove them and touch up with OWATROL® OIL.\u003c\/li\u003e\n\n\u003cli\u003eNew metal: OWATROL® OIL can be used as a primer—mix one part OWATROL® OIL with three parts alkyd primer, or apply one thin coat without mixing. Once dry, the surface can be painted with paint containing OWATROL® OIL.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003eApplication on wood\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eWood in good condition: Prime with a mixture of OWATROL® OIL and paint primer, then apply paint mixed with OWATROL® OIL (usually 5–20% of the paint volume).\u003c\/li\u003e\n\n\u003cli\u003eDamaged or porous wood: Apply several coats wet-on-wet, without allowing drying time between coats. When the wood no longer absorbs the product, wipe off excess oil and allow to dry. Continue with the standard paint system, adding OWATROL® OIL.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003ePaint conditioning The product significantly improves the properties of oil-based paints and varnishes:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eExtends wet-edge working time\u003c\/li\u003e\n\n\u003cli\u003ePrevents paint from sticking, dragging and setting too quickly\u003c\/li\u003e\n\n\u003cli\u003eImproves paint flow and levelling, delivering a professional finish even in difficult conditions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003eRecommended paint mixing ratios\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eTopcoat paint: 5–20% by volume\u003c\/li\u003e\n\n\u003cli\u003ePrimers: up to 30%\u003c\/li\u003e\n\n\u003cli\u003eBase coat (first coat): up to 50%. These ratios can be adjusted on site depending on the condition and porosity of the surface.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical specifications\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eBinder: alkyd\u003c\/li\u003e\n\n\u003cli\u003eSolvent: white spirit\u003c\/li\u003e\n\n\u003cli\u003eSolids content: 49% ±2%\u003c\/li\u003e\n\n\u003cli\u003eDensity: 0.89 ±0.05 at 20°C\u003c\/li\u003e\n\n\u003cli\u003eGloss level: \u0026amp;gt;70%\u003c\/li\u003e\n\n\u003cli\u003eVOC content: up to 489 g\/l\u003c\/li\u003e\n\n\u003cli\u003eDrying time: touch dry 12 h, fully dry 24 h, recoatable after 24–48 h\u003c\/li\u003e\n\n\u003cli\u003eHeat resistance: up to 175°C\u003c\/li\u003e\n\n\u003cli\u003eApplication: by brush, roller or airless sprayer (recommended tips: 517 or 519)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003ePackaging options Available in various sizes: aerosol 300 ml, 500 ml, 1 L.\u003c\/p\u003e\n\u003ch4\u003eSafety and storage\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eThe product is not classified as flammable, but oil-soaked cloths may spontaneously ignite if not disposed of properly\u003c\/li\u003e\n\n\u003cli\u003eStore in a cool place, avoiding frost and high temperatures\u003c\/li\u003e\n\n\u003cli\u003eDetailed safety information is available on the manufacturer's website:\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"Default Title","offer_id":58783744622924,"sku":"732DE\/GB-1","price":28.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/product-19-bg-removed.png?v=1791369106"},{"product_id":"owatrol-oil-bezkrasains-universals-rusas-stabilizators-1l","title":"Owatrol Oil - Colourless Universal Rust Stabilizer, 1 L","description":"\u003ch3\u003eOWATROL® OIL Colourless Universal Rust Stabiliser 1L – Multifunctional Rust Stabiliser and Paint Conditioner for Oil-Based Coatings\u003c\/h3\u003e\n\u003cp\u003eOWATROL® OIL is a highly penetrating, air-drying alkyd oil formulated to prevent rust, improve paint adhesion and provide long-lasting protection against the elements. The product is suitable both as a stand-alone protective coating and as an additive for oil- and alkyd-based paints, varnishes and stains.\u003c\/p\u003e\n\u003cp\u003eIts special formula displaces air and moisture in rust, creating a stable, non-flaking surface that can be safely painted over. OWATROL® OIL also saturates dry, porous wood surfaces with oil, preventing paint from peeling and improving the finish on wood.\u003c\/p\u003e\n\u003ch4\u003eProduct applications\u003c\/h4\u003e\n\u003cp\u003eOWATROL® OIL is suitable for a range of materials and surfaces:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMetal (both rusty and new): steel structures, pipes, railings, equipment, trailers, tanks\u003c\/li\u003e\n\n\u003cli\u003eWood: dry, damaged, porous surfaces, both horizontal and vertical\u003c\/li\u003e\n\n\u003cli\u003eExterior and interior applications\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003eKey features and benefits\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eCan be applied directly to rust without having to clean the metal back to bare metal\u003c\/li\u003e\n\n\u003cli\u003ePenetrates deep into the rust layer, displacing moisture and stopping the corrosion process\u003c\/li\u003e\n\n\u003cli\u003eForms a stable layer that provides excellent paint adhesion\u003c\/li\u003e\n\n\u003cli\u003eCompatible with oil\/alkyd-based coatings, including urethane alkyd paints\u003c\/li\u003e\n\n\u003cli\u003eImproves paint flow and extends wet-edge working time, enhancing adhesion in challenging conditions\u003c\/li\u003e\n\n\u003cli\u003eFills wood pores with oil, preventing paint from peeling and ensuring long-lasting adhesion\u003c\/li\u003e\n\n\u003cli\u003eWithstands temperatures of up to 175°C once fully dry\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003eApplication on metal surfaces\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eRusty metal: Apply wet-on-wet until the surface becomes uniformly glossy. This indicates complete saturation. After the first application, check for any loose rust flakes; these can be carefully removed and the area touched up with OWATROL® OIL.\u003c\/li\u003e\n\n\u003cli\u003eNew metal: OWATROL® OIL can be used as a primer—one part OWATROL® OIL to three parts alkyd primer, or apply one thin coat undiluted. Once dry, the surface can be coated with paint containing OWATROL® OIL.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003eApplication on wood\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eWood in good condition: Prime with a mixture of OWATROL® OIL and paint primer, then apply paint mixed with OWATROL® OIL (usually 5–20% of the paint volume).\u003c\/li\u003e\n\n\u003cli\u003eDamaged or porous wood: Apply several coats wet-on-wet without allowing drying time between coats. Once the wood no longer absorbs the product, wipe off excess oil and allow to dry. Continue with a standard paint system, adding OWATROL® OIL.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003ePaint conditioning The product significantly improves the performance of oil-based paints and varnishes:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eExtends wet-edge working time\u003c\/li\u003e\n\n\u003cli\u003ePrevents paint from sticking, dragging and drying too quickly\u003c\/li\u003e\n\n\u003cli\u003eImproves paint flow, delivering a professional finish even in challenging conditions\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003eRecommended mixing ratios with paint\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eTopcoat paint: 5–20% by volume\u003c\/li\u003e\n\n\u003cli\u003ePrimers: up to 30%\u003c\/li\u003e\n\n\u003cli\u003eBase coat (first coat): up to 50%. These ratios can be adjusted on site depending on the condition and porosity of the surface.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch4\u003eTechnical specifications\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eBinder: alkyd\u003c\/li\u003e\n\n\u003cli\u003eSolvent: white spirit\u003c\/li\u003e\n\n\u003cli\u003eSolids content: 49% ±2%\u003c\/li\u003e\n\n\u003cli\u003eDensity: 0.89 ±0.05 at 20°C\u003c\/li\u003e\n\n\u003cli\u003eGloss level: \u0026amp;gt;70%\u003c\/li\u003e\n\n\u003cli\u003eVOC content: up to 489 g\/l\u003c\/li\u003e\n\n\u003cli\u003eDrying time: touch dry 12 h, fully dry 24 h, recoatable after 24–48 h\u003c\/li\u003e\n\n\u003cli\u003eHeat resistance: up to 175°C\u003c\/li\u003e\n\n\u003cli\u003eApplication: by brush, roller or airless sprayer (recommended tips: 517 or 519)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003ePackaging options Available in various sizes: 300 ml aerosol, 500 ml, 1 L.\u003c\/p\u003e\n\u003ch4\u003eSafety and storage\u003c\/h4\u003e\n\u003cul\u003e\n\n\u003cli\u003eThe product is not classified as flammable, but oil-soaked cloths may spontaneously combust if not disposed of properly\u003c\/li\u003e\n\n\u003cli\u003eStore in a cool place, avoiding frost and high temperatures\u003c\/li\u003e\n\n\u003cli\u003eDetailed safety information is available on the manufacturer's website:\u003c\/li\u003e\n\n\n\u003c\/ul\u003e","brand":"Owatrol","offers":[{"title":"Default Title","offer_id":58783744819532,"sku":"733DE\/GB","price":44.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/product-20-bg-removed.png?v=1791369107"},{"product_id":"mercasol-1-profesionala-auto-antikorozijas-apstrade-1l","title":"Mercasol 1 – Professional Automotive Anti-Corrosion Treatment, 1 L","description":"\u003ch3\u003eAutomotive anti-corrosion treatment with Mercasol 1\u003c\/h3\u003e\n\u003cp\u003eOne of the most important steps in ensuring a vehicle’s longevity. This highly effective, solvent-based anti-rust product is specially formulated to provide exceptional protection in hidden cavities, seams and joints, where the risk of corrosion is highest.\u003c\/p\u003e\n\u003ch3\u003eHow does it work?\u003c\/h3\u003e\n\u003cp\u003eA professional-grade anti-corrosion product based on a unique formula of waxes, sulphonates and special oils. Unlike standard solutions, this product forms a durable, greasy and highly moisture-repellent layer after application. Its low viscosity ensures deep penetration, allowing it to effectively reach seams, joints and metal folds. The liquid penetrates deep into even microscopic cracks and hard-to-reach cavities in the car frame.\u003c\/p\u003e\n\u003cp\u003eOnce dry, the product remains flexible and forms a brown, moisture-repellent wax film that does not crack even under sharp temperature fluctuations. This makes it an ideal choice for Latvia’s changeable weather, where salt and moisture are a constant threat to metal surfaces.\u003c\/p\u003e\n\u003cp\u003eThe product has been evaluated in comparative tests and approved for use on most car makes.\u003c\/p\u003e\n\u003ch3\u003eKey technical advantages\u003c\/h3\u003e\n\u003cp\u003eWhen carrying out anti-corrosion treatment, it is important to use materials that not only coat the surface but also provide long-term protection.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eDeep penetration: Thanks to its high penetrating ability, the product effectively reaches seams, gaps and structural joints.\u003c\/li\u003e\n\n\u003cli\u003eEffective corrosion protection: Excellent adhesion to metal surfaces, preventing air and moisture from reaching them.\u003c\/li\u003e\n\n\u003cli\u003eEnvironmental sustainability: The product complies with the strict SS 18 65 11 standard and contains a significant proportion of renewable raw materials, reducing its environmental impact without compromising performance.\u003c\/li\u003e\n\n\u003cli\u003eVersatility: Can be used both as a standalone cavity protection product and as a primer before applying thicker underbody coatings.\u003c\/li\u003e\n\n\u003cli\u003eProven compatibility: Mercasol 1 has been tested and approved for use with various corrosion protection systems and is compatible with many car makes.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eApplications and compatibility\u003c\/h3\u003e\n\u003cp\u003eMercasol 1 is designed to protect hidden structures and joint areas of cars against corrosion, and can also be used as a base coat in a system with Mercasol underbody coatings.\u003c\/p\u003e\n\u003cp\u003eInternal cavities: Doors, sills, chassis rails and boot lids, where moisture accumulation promotes rust formation.\u003c\/p\u003e\n\u003cp\u003eSeams and joints: Flanges and structural joints that need protection against the ingress of moisture and salt.\u003c\/p\u003e\n\u003cp\u003eAs a base coat for exposed surfaces: Can be used as a base layer in underbody protection systems in combination with Mercasol 3 or Mercasol 3AL, improving the adhesion of the next layer to the surface.\u003c\/p\u003e\n\u003cp\u003eThe product is compatible with most modern automotive corrosion protection systems and has been tested for use on factory coatings.\u003c\/p\u003e\n\u003ch3\u003eInstructions for use\u003c\/h3\u003e\n\u003cp\u003eFor maximum effectiveness, the anti-rust treatment process must be followed carefully:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eSurface preparation: Before treatment, make sure the surface is clean and dry. Remove all loose rust, dirt, oil and road salt residue. Remember—proper preparation accounts for 50% of the result.\u003c\/li\u003e\n\n\u003cli\u003eApplication: The product can be applied with a spray gun using suitable equipment with cavity tubes. The optimum working temperature is between +15°C and +25°C.\u003c\/li\u003e\n\n\u003cli\u003eDrying time: Drying time depends on the air humidity. At +23°C and 50% relative humidity, it is approximately 8 hours.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eIf you plan to apply Mercasol 3 or 3AL, it is recommended to wait at least 1 hour after applying Mercasol 1.\u003c\/p\u003e\n\u003ch3\u003eCompatibility and system use\u003c\/h3\u003e\n\u003cp\u003eMercasol is part of a multi-layer anti-corrosion protection system in which proper surface preparation is essential.\u003c\/p\u003e\n\u003cp\u003eImportant: Mercasol 1 and Mercasol 3 products are not intended for direct application to active rust.\u003c\/p\u003e\n\u003cp\u003eFor rusty surfaces, we recommend using Owatrol Oil as the first stabilising layer. It penetrates the rust, stops its progression and forms a solid, stable coating that prepares the surface for further treatment. Available in: 300 ml aerosol, 0.5 l and 1 l packs.\u003c\/p\u003e\n\u003cp\u003eAfter stabilising the surface:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMercasol 1 protects internal cavities after surface stabilisation.\u003c\/li\u003e\n\n\u003cli\u003eMercasol 3 AL (bronze) provides an exterior protective layer with high mechanical and moisture resistance, thanks to its aluminium pigment content.\u003c\/li\u003e\n\n\u003cli\u003eMercasol 3 BL (black) is an alternative coating with the same protective properties, chosen according to aesthetic or application requirements.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eMercasol products are available:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eIn a 600 ml aerosol format, equipped with a special nozzle for precise application\u003c\/li\u003e\n\n\u003cli\u003eThe 1 l pack is designed for use with a pneumatic spray gun and a special cavity probe.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eTogether, these layers form a complete corrosion protection system for the car body and underbody, with clearly defined functions: rust stabilisation, cavity protection and an external mechanical barrier.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications and standards\u003c\/h3\u003e\n\u003cp\u003eBase: Waxes, sulphonates and oils Colour: Semi-transparent brown Consistency: Viscous liquid Film type: Wax\u003c\/p\u003e\n\u003cp\u003eDensity (20°C): 860 ± 20 kg\/m³ Solids content: 51 ± 3 % Solvent: Aliphatic naphtha\u003c\/p\u003e\n\u003cp\u003eFilm thickness: 200 µm (wet film) \/ 90 µm (dry film) Material consumption: ~0.2 l\/m²\u003c\/p\u003e\n\u003cp\u003eApplication temperature: +15°C to +25°C Drying time: ~8 hours (+23°C, 50% RH)\u003c\/p\u003e\n\u003cp\u003eShelf life: 12 months Storage temperature: +5°C to +35°C\u003c\/p\u003e\n\u003cp\u003eStandard: SS 18 65 11 Product manufactured in: Sweden\u003c\/p\u003e","brand":"Auson Sweden","offers":[{"title":"Default Title","offer_id":58783746130252,"sku":"42000511","price":20.49,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/product-21-bg-removed.png?v=1791369108"},{"product_id":"mercasol-3-al-bronza-profesionala-auto-pretkorozijas-apstrade-1l","title":"Mercasol 3 AL Bronze – Professional Automotive Anti-Corrosion Treatment, 1 L","description":"\u003ch3\u003eCar underbody anti-corrosion treatment with Mercasol 3 AL Bronze 1L\u003c\/h3\u003e\n\u003cp\u003eMercasol 3 is a professional automotive anti-corrosion treatment product designed to provide long-term protection for vehicle underbodies and wheel arches against mechanical wear and corrosion. The product is based on bitumen and wax, diluted with aliphatic naphtha to ensure good adhesion and a durable protective coating.\u003c\/p\u003e\n\u003ch3\u003eHow does it work?\u003c\/h3\u003e\n\u003cp\u003eMercasol 3 BL (black) is a coating based on plasticised bitumen and wax, designed for harsh operating conditions.\u003c\/p\u003e\n\u003cp\u003eOnce applied, it forms a thick, flexible and mechanically durable film that effectively protects the surface from impacts from stones and gravel, road salt, moisture and corrosion.\u003c\/p\u003e\n\u003cp\u003eThe coating is designed to resist chipping and peeling caused by vibrations and impacts, maintaining long-term protection.\u003c\/p\u003e\n\u003cp\u003eThis product has become a standard for many specialist workshops because it effectively prevents corrosion in areas most exposed to road debris, sand and stones. Anti-corrosion treatment with this product ensures the car underbody remains intact even after several harsh winter seasons.\u003c\/p\u003e\n\u003cp\u003eThe product is compatible with most car manufacturers’ corrosion protection systems.\u003c\/p\u003e\n\u003ch3\u003eKey technical advantages\u003c\/h3\u003e\n\u003cp\u003eWhen carrying out anti-corrosion treatment, it is important to use materials that not only coat the surface but also actively combat oxidation.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eImpact resistance: Thanks to the flexibility of bitumen and its wax-based formula, the resulting layer absorbs stone impacts, preventing the coating from cracking or peeling.\u003c\/li\u003e\n\n\u003cli\u003eHigh viscosity: When applied, it forms a thick layer with excellent adhesion to metal surfaces, preventing air and moisture from getting through.\u003c\/li\u003e\n\n\u003cli\u003eLong-term stability: The product retains its protective properties for a long time without losing flexibility due to temperature fluctuations.\u003c\/li\u003e\n\n\u003cli\u003eCompatibility: It has been tested and approved for use with most car manufacturers’ original anti-corrosion systems.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eAreas of use\u003c\/h3\u003e\n\u003cp\u003eThe product is designed for vehicle structures exposed directly to external elements:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003ecar underbody (chassis)\u003c\/li\u003e\n\n\u003cli\u003ewheel arches\u003c\/li\u003e\n\n\u003cli\u003emetal surfaces exposed to abrasive wear\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eFor a complete protection system, use with Mercasol 1 for cavity and seam protection is recommended.\u003c\/p\u003e\n\u003ch3\u003eInstructions for use\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSurface preparation: The surface must be dry and free of rust, salt and oils. For cavity and joint protection, it is recommended to use Mercasol 1 first.\u003c\/li\u003e\n\n\u003cli\u003eApplication: Working temperature: +15°C to +25°C. Apply an even coating with a pneumatic spray gun or aerosol (2 coats if necessary).\u003c\/li\u003e\n\n\u003cli\u003eRecommended film thickness: ~400 µm wet film, ~200 µm dry film.\u003c\/li\u003e\n\n\u003cli\u003eDrying: Surface dry in ~4 hours under standard conditions.\u003c\/li\u003e\n\n\u003cli\u003eCleaning: Clean tools with aliphatic naphtha or Mercasol Cleaner\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility and system use\u003c\/h3\u003e\n\u003cp\u003eMercasol is part of a multi-layer anti-corrosion protection system, where correct surface preparation is essential.\u003c\/p\u003e\n\u003cp\u003eImportant: Mercasol 1 and Mercasol 3 products are not intended for direct application to active rust.\u003c\/p\u003e\n\u003cp\u003eFor rusting surfaces, we recommend using Owatrol Oil as the first stabilising layer. It penetrates the rust, stops its progression and forms a monolithic, stable coating that prepares the surface for further treatment. Available in: 300 ml aerosol, 0.5 l and 1 l packs.\u003c\/p\u003e\n\u003cp\u003eAfter surface stabilisation:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMercasol 1 protects internal cavities after surface stabilisation.\u003c\/li\u003e\n\n\u003cli\u003eMercasol 3 AL (bronze) provides an external protective layer with high mechanical and moisture resistance thanks to its aluminium pigment content.\u003c\/li\u003e\n\n\u003cli\u003eMercasol 3 BL (black) is an alternative coating with the same protective properties, selected according to aesthetic or application requirements.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eProducts are available:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003ein a 600 ml aerosol format equipped with a special nozzle for precise application\u003c\/li\u003e\n\n\u003cli\u003ein a 1 l pack intended for use with a pneumatic spray gun and a special cavity probe.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eCombined, these layers form a complete corrosion protection system for the car body and underbody, with clearly defined functions: rust stabilisation, cavity protection and an external mechanical barrier.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications and standards\u003c\/h3\u003e\n\u003cp\u003eBase: plasticised bitumen and wax Colour: bronze Consistency: viscous liquid Film type: plastic bitumen\u003c\/p\u003e\n\u003cp\u003eDensity (20°C): 1000 ± 20 kg\/m³ Solids content: 60 ± 5% Solvent: aliphatic naphtha (\u0026amp;lt;0.1% aromatic compounds)\u003c\/p\u003e\n\u003cp\u003eFilm thickness: 2–5 mm Application temperature: +15°C to +35°C Material consumption: ~0.4 l\/m²\u003c\/p\u003e\n\u003cp\u003eShelf life: 12 months (1 l), 24 months (aerosol)\u003c\/p\u003e\n\u003ch3\u003eStorage temperature: +5°C to +35°C Product made in: Sweden\u003c\/h3\u003e","brand":"Auson Sweden","offers":[{"title":"Default Title","offer_id":58783746523468,"sku":"43700511","price":22.75,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/product-22-bg-removed.png?v=1791369110"},{"product_id":"mercasol-1-profesionala-auto-antikorozijas-apstrade-600ml-aerosols","title":"Mercasol 1 – Professional automotive anti-corrosion treatment, 600 ml aerosol spray","description":"\u003ch3\u003eAutomotive anti-corrosion treatment with Mercasol 1\u003c\/h3\u003e\n\u003cp\u003eOne of the most important steps in ensuring a vehicle’s longevity. This highly effective, solvent-based rust inhibitor is specially formulated to provide outstanding protection in hidden cavities, seams and joints, where the risk of corrosion is highest.\u003c\/p\u003e\n\u003ch3\u003eHow does it work?\u003c\/h3\u003e\n\u003cp\u003eA professional-grade anti-corrosion agent based on a unique formula of waxes, sulphonates and special oils. Unlike standard solutions, this product forms a durable, greasy and highly moisture-repellent layer after application. Its low viscosity enables deep penetration into surfaces, allowing it to effectively reach seams, joints and folds in metal. The liquid penetrates deep into even microscopic cracks and hard-to-reach cavities in the vehicle frame.\u003c\/p\u003e\n\u003cp\u003eOnce dry, the product remains flexible and forms a brown, moisture-repellent wax film that does not crack even with extreme temperature fluctuations. This makes it an ideal choice for Latvia’s changing weather conditions, where salt and moisture pose a constant threat to metal surfaces.\u003c\/p\u003e\n\u003cp\u003eThe product has been tested in comparative trials and approved for use on most car makes.\u003c\/p\u003e\n\u003ch3\u003eKey technical benefits\u003c\/h3\u003e\n\u003cp\u003eWhen carrying out anti-corrosion treatment, it is important to use materials that not only coat the surface but also provide long-term protection.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eDeep penetration: Thanks to its high penetrating power, the product effectively reaches seams, gaps and structural joints.\u003c\/li\u003e\n\n\u003cli\u003eEffective corrosion protection: Excellent adhesion to metal surfaces, preventing air and moisture from reaching them.\u003c\/li\u003e\n\n\u003cli\u003eEnvironmental sustainability: The product complies with the stringent SS 18 65 11 standard and contains a significant proportion of renewable raw materials, reducing its environmental impact without compromising performance.\u003c\/li\u003e\n\n\u003cli\u003eVersatile use: Can be used both as a standalone cavity treatment and as a primer before applying thicker underbody coatings.\u003c\/li\u003e\n\n\u003cli\u003eProven compatibility: Mercasol 1 has been tested and approved for use with various corrosion protection systems and is compatible with many car makes.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eAreas of use and compatibility\u003c\/h3\u003e\n\u003cp\u003eMercasol 1 is designed to protect hidden structures and joints in cars against corrosion, and can also be used as a base coat in combination with Mercasol underbody coatings.\u003c\/p\u003e\n\u003cp\u003eInternal cavities: Doors, sills, chassis rails and boot lids, where moisture build-up promotes rust formation.\u003c\/p\u003e\n\u003cp\u003eSeams and joints: Flanges and structural joints that need protection against moisture and salt ingress.\u003c\/p\u003e\n\u003cp\u003eAs a base coat on exposed surfaces: Can be used as a base layer in underbody protection systems in combination with Mercasol 3 or Mercasol 3AL, improving the adhesion of the next layer to the surface.\u003c\/p\u003e\n\u003cp\u003eThe product is compatible with most modern automotive corrosion protection systems and has been tested for use on factory coatings.\u003c\/p\u003e\n\u003ch3\u003eInstructions for use\u003c\/h3\u003e\n\u003cp\u003eFor maximum effectiveness, the anti-rust treatment process must be followed carefully:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eSurface preparation: Before treatment, make sure the surface is clean and dry. Remove all loose rust, dirt, oil and road salt residue. Remember—a quality preparation is 50% of the result.\u003c\/li\u003e\n\n\u003cli\u003eApplication: The product can be applied using a special nozzle for precise dispensing. The optimum application temperature is between +15°C and +25°C.\u003c\/li\u003e\n\n\u003cli\u003eDrying time: Drying time depends on the air humidity. At +23°C and 50% relative humidity, it is approximately 8 hours.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eIf you plan to apply Mercasol 3 or 3AL, we recommend waiting at least 1 hour after applying Mercasol 1.\u003c\/p\u003e\n\u003ch3\u003eCompatibility and system use\u003c\/h3\u003e\n\u003cp\u003eMercasol is part of a multi-layer anti-corrosion protection system in which proper surface preparation is essential.\u003c\/p\u003e\n\u003cp\u003eImportant: Mercasol 1 and Mercasol 3 products are not intended for application directly onto active rust.\u003c\/p\u003e\n\u003cp\u003eFor rusted surfaces, we recommend using Owatrol Oil as the first stabilising layer. It penetrates the rust, stops it from progressing and forms a solid, stable coating that prepares the surface for further treatment. Available in: 300 ml aerosol, 0.5 l and 1 l packs.\u003c\/p\u003e\n\u003cp\u003eAfter stabilising the surface:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMercasol 1 protects internal cavities after surface stabilisation.\u003c\/li\u003e\n\n\u003cli\u003eMercasol 3 AL (bronze) provides an external protective layer with high mechanical and moisture resistance, thanks to its aluminium pigment content.\u003c\/li\u003e\n\n\u003cli\u003eMercasol 3 BL (black) is an alternative coating with the same protective properties, selected according to aesthetic preferences or application requirements.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eMercasol products are available in:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003e600 ml aerosol format, fitted with a special nozzle for precise dispensing\u003c\/li\u003e\n\n\u003cli\u003e1 l pack, designed for use with a pneumatic spray gun and a special cavity probe.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eUsed together, these layers form a complete corrosion protection system for the vehicle body and underbody, with clearly defined functions: rust stabilisation, cavity protection and an external mechanical barrier.\u003c\/p\u003e\n\u003cp\u003eA separately available 360° internal cavity spray probe is also available for convenient, even coating application.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications and standards\u003c\/h3\u003e\n\u003cp\u003eBase: Waxes, sulphonates and oils Colour: Translucent brown Consistency: Viscous liquid Film type: Wax\u003c\/p\u003e\n\u003cp\u003eDensity (20°C): 860 ± 20 kg\/m³ Solids content: 51 ± 3% Solvent: Aliphatic naphtha\u003c\/p\u003e\n\u003cp\u003eFilm thickness: 200 µm (wet film) \/ 90 µm (dry film) Material consumption: ~0.2 l\/m²\u003c\/p\u003e\n\u003cp\u003eApplication temperature: +15°C to +25°C Drying time: ~8 hours (+23°C, 50% RH)\u003c\/p\u003e\n\u003cp\u003eShelf life: 12 months Storage temperature: +5°C to +35°C\u003c\/p\u003e\n\u003cp\u003eStandard: SS 18 65 11 Product manufactured in: Sweden\u003c\/p\u003e","brand":"Auson Sweden","offers":[{"title":"Default Title","offer_id":58783746982220,"sku":"42700096","price":16.94,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/product-23-bg-removed.png?v=1791369111"},{"product_id":"mercasol-3-al-bronza-profesionala-auto-pretkorozijas-apstrade-600ml-aerosols","title":"Mercasol 3 AL Bronze – Professional Automotive Anti-Corrosion Treatment, 600 ml Aerosol","description":"\u003ch3\u003eCar Anti-Corrosion Treatment with Mercasol 3 AL Bronze 600 ml\u003c\/h3\u003e\n\u003cp\u003eMercasol 3 is a professional automotive anti-corrosion treatment product designed to provide long-term protection for vehicle underbodies and wheel arches against mechanical wear and corrosion. The product is based on bitumen and wax, diluted with aliphatic petroleum solvent, ensuring good adhesion and a durable protective coating.\u003c\/p\u003e\n\u003ch3\u003eHow does it work?\u003c\/h3\u003e\n\u003cp\u003eMercasol 3 BL (black) is a coating based on plasticised bitumen and wax, designed for harsh operating conditions.\u003c\/p\u003e\n\u003cp\u003eAfter application, it forms a thick, flexible and mechanically durable film that effectively protects the surface from impacts from stones and gravel, road salt, moisture and corrosion.\u003c\/p\u003e\n\u003cp\u003eThe coating is designed to resist chipping and peeling under vibration and impact, maintaining long-term protection.\u003c\/p\u003e\n\u003cp\u003eThis product has become a standard in many specialist workshops because it effectively prevents corrosion in areas most exposed to road debris, sand and stones. Anti-corrosion treatment with this product ensures that the car underbody remains intact even after several harsh winter seasons.\u003c\/p\u003e\n\u003cp\u003eThe product is compatible with most automotive manufacturers’ corrosion protection systems.\u003c\/p\u003e\n\u003ch3\u003eKey technical benefits\u003c\/h3\u003e\n\u003cp\u003eWhen carrying out anti-corrosion treatment, it is important to use materials that not only coat the surface but also actively combat oxidation.\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eImpact resistance: Thanks to the flexibility of the bitumen and the wax-based formula, the layer formed absorbs stone impacts, preventing the coating from cracking or peeling.\u003c\/li\u003e\n\n\u003cli\u003eHigh viscosity: When applied, it forms a thick coating with excellent adhesion to metal surfaces, preventing air and moisture from reaching them.\u003c\/li\u003e\n\n\u003cli\u003eLong-term stability: The product retains its protective properties for a long time without losing flexibility due to temperature fluctuations.\u003c\/li\u003e\n\n\u003cli\u003eCompatibility: It has been tested and approved for use with most automotive manufacturers’ original anti-corrosion systems.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eAreas of use\u003c\/h3\u003e\n\u003cp\u003eThe product is intended for vehicle structures exposed to direct external conditions:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003ecar underbody (chassis)\u003c\/li\u003e\n\n\u003cli\u003ewheel arches\u003c\/li\u003e\n\n\u003cli\u003emetal surfaces exposed to abrasive wear\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eFor a complete protection system, it is recommended to use Mercasol 1 for cavity and seam protection.\u003c\/p\u003e\n\u003ch3\u003eInstructions for use\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eSurface preparation: The surface must be dry and free from rust, salt and oil. For cavity and joint protection, it is recommended to use Mercasol 1 beforehand.\u003c\/li\u003e\n\n\u003cli\u003eApplication: Working temperature: +15°C to +25°C. Apply an even coating with a pneumatic spray gun or aerosol (2 coats if necessary).\u003c\/li\u003e\n\n\u003cli\u003eRecommended film thickness: ~400 µm wet film, ~200 µm dry film.\u003c\/li\u003e\n\n\u003cli\u003eDrying: Touch-dry in ~4 hours under standard conditions.\u003c\/li\u003e\n\n\u003cli\u003eCleaning: Clean tools with aliphatic petroleum solvent or Mercasol Cleaner\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eCompatibility and system use\u003c\/h3\u003e\n\u003cp\u003eMercasol is part of a multi-layer anti-corrosion protection system in which proper surface preparation is essential.\u003c\/p\u003e\n\u003cp\u003eImportant: Mercasol 1 and Mercasol 3 products are not intended for direct application to active rust.\u003c\/p\u003e\n\u003cp\u003eFor rusty surfaces, we recommend using Owatrol Oil as the first stabilising layer. It penetrates the rust, stops its progression and forms a solid, stable coating that prepares the surface for further treatment. Available in: 300 ml aerosol, 0.5 L and 1 L packs.\u003c\/p\u003e\n\u003cp\u003eAfter stabilising the surface:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eMercasol 1 provides protection for internal cavities after surface stabilisation.\u003c\/li\u003e\n\n\u003cli\u003eMercasol 3 AL (bronze) provides an external protective layer with high mechanical and moisture resistance, thanks to its aluminium pigment content.\u003c\/li\u003e\n\n\u003cli\u003eMercasol 3 BL (black) is an alternative coating with the same protective properties, selected according to aesthetic or application requirements.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eProducts are available:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003ein a 600 ml aerosol format equipped with a special nozzle for precise application\u003c\/li\u003e\n\n\u003cli\u003ethe 1 L pack is intended for use with a pneumatic spray gun and a special cavity probe.\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eUsed together, these layers form a complete corrosion protection system for the car body and underbody, with clearly defined functions: rust stabilisation, cavity protection and an external mechanical barrier.\u003c\/p\u003e\n\u003ch3\u003eTechnical specifications and standards\u003c\/h3\u003e\n\u003cp\u003eBase: plasticised bitumen and wax Colour: Bronze Consistency: viscous liquid Film type: plastic bitumen\u003c\/p\u003e\n\u003cp\u003eDensity (20°C): 1000 ± 20 kg\/m³ Solids content: 60 ± 5% Solvent: aliphatic petroleum solvent (\u0026amp;lt;0.1% aromatic compounds)\u003c\/p\u003e\n\u003cp\u003eFilm thickness: 2–5 mm Application temperature: +15°C to +35°C Material consumption: ~0.4 L\/m²\u003c\/p\u003e\n\u003cp\u003eShelf life: 12 months (1 L), 24 months (aerosol)\u003c\/p\u003e\n\u003ch3\u003eStorage temperature: +5°C to +35°C Product made in: Sweden\u003c\/h3\u003e","brand":"Auson Sweden","offers":[{"title":"Default Title","offer_id":58783747539276,"sku":"43700096","price":17.5,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/product-24-bg-removed.png?v=1791369112"},{"product_id":"brantho-korrux-3-in-1-750ml-melns-ral-9005","title":"Brantho-Korrux “3 in 1” 750 ml (black, RAL 9005)","description":"\u003ch3\u003eBrantho-Korrux “3 in 1” – Universal Single-Component Corrosion Protection Coating\u003c\/h3\u003e\n\u003cp\u003eBrantho-Korrux “3 in 1” (jet black) is a high-quality, environmentally friendly, single-component industrial coating with a proven track record in the construction, infrastructure, transport and industrial sectors. The product combines a primer, intermediate coat and topcoat, significantly reducing processing time and costs without compromising protection. It is designed for use on a wide range of surfaces in various service environments, including C5-M in accordance with DIN EN ISO 12944.\u003c\/p\u003e\n\u003cp\u003eRAL 9005 (Jet Black) is a deep black shade from the RAL Classic colour palette. It is one of the most commonly used black industrial shades, chosen for metal structures, equipment and technical components where a neutral, practical and visually striking coating is required. In this shade, Brantho-Korrux 3in1 combines an anti-corrosion primer, intermediate coat and finish in one product, providing long-lasting protection for metal.\u003c\/p\u003e\n\u003ch3\u003ePractical applications\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eVehicle frames, trailer structures and metal parts requiring a durable black protective coating.\u003c\/li\u003e\n\n\u003cli\u003eAgricultural, construction and municipal machinery parts – frames, brackets, guards and metal components.\u003c\/li\u003e\n\n\u003cli\u003eIndustrial equipment housings and machinery parts in manufacturing environments.\u003c\/li\u003e\n\n\u003cli\u003eSteel structures, supports and metal frameworks.\u003c\/li\u003e\n\n\u003cli\u003eTool cabinets, workshop equipment and technical metal components\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eChemical composition and environmental properties:\u003c\/h3\u003e\n\u003cp\u003eThe product is based on polyester resins with active, multi-stage rust-inhibiting pigments that provide excellent corrosion protection. The formulation is completely free of lead, zinc, chromium and aromatic hydrocarbons such as toluene and xylene. The product meets the strictest environmental safety criteria (DIN ISO 14001, EMAS) and is classified as A+ for emissions in accordance with French indoor air quality standards.\u003c\/p\u003e\n\u003ch3\u003ePhysical properties:\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eGloss level: Semi-matt (25–55%), depending on the pigment\u003c\/li\u003e\n\n\u003cli\u003eSolids content: ~70% by weight, ~53% by volume\u003c\/li\u003e\n\n\u003cli\u003eDensity: 1.2–1.5 g\/cm³ (varies depending on the pigment)\u003c\/li\u003e\n\n\u003cli\u003eVOC content: Less than 400 g\/l, depending on the amount of thinner added\u003c\/li\u003e\n\n\u003cli\u003eElectrical conductivity: Suitable for use on the exterior of fuel tanks\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eDrying and curing parameters:\u003c\/h3\u003e\n\u003cp\u003eAt 20 °C and 65% relative humidity:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eTouch dry: 20–30 minutes\u003c\/li\u003e\n\n\u003cli\u003eFully dry: 8–10 hours\u003c\/li\u003e\n\n\u003cli\u003eFully cured: 3–4 days\u003c\/li\u003e\n\n\u003cli\u003eMaximum mechanical strength: 7–10 days\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThe product is not suitable for thermal drying (it cannot be oven-dried); however, it continues to cure over time, improving adhesion even after several days.\u003c\/p\u003e\n\u003ch3\u003eCoating thickness and coverage:\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eTheoretical coverage: 8.8 m²\/l at a dry film thickness of 60 µm\u003c\/li\u003e\n\n\u003cli\u003eWith MIO pigments (e.g. RAL 9006, DB701): thicknesses of up to 120 µm can be achieved in a single coat\u003c\/li\u003e\n\n\u003cli\u003eDrying time may be longer with thicker coats, but this improves corrosion protection\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eApplication methods and conditions:\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eBrush\/roller: Ready to use without thinning\u003c\/li\u003e\n\n\u003cli\u003eAirless spraying: Nozzle 0.5–0.7 mm, pressure ≥160 bar, thinning ~3%\u003c\/li\u003e\n\n\u003cli\u003eConventional air spraying: Nozzle 2.0–2.5 mm, pressure 4–5 bar, thinning ~10%\u003c\/li\u003e\n\n\u003cli\u003eHVLP\/Airmix: Thinning of up to 15% is permitted\u003c\/li\u003e\n\n\u003cli\u003eDipping: Keep the coating material stirred regularly; particularly suitable for production environments\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eOptimum application temperature: +15 °C to +25 °C; permissible range: -10 °C to +30 °C. At low temperatures, using warm material or solvent is recommended.\u003c\/p\u003e\n\u003ch3\u003eSuitable surfaces:\u003c\/h3\u003e\n\u003cp\u003eThe coating can be applied to:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eIron, steel, stainless steel, zinc, aluminium, copper\u003c\/li\u003e\n\n\u003cli\u003eOld coatings, rust, concrete, screed, glass\u003c\/li\u003e\n\n\u003cli\u003eMany rigid plastics (ABS, PS, PC, GRP, etc.)\u003c\/li\u003e\n\n\u003cli\u003eAnodised aluminium, galvanised metal (with pretreatment)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eNot suitable for use on soft plastics such as PE, PP or soft PVC.\u003c\/p\u003e\n\u003ch3\u003eResistance properties:\u003c\/h3\u003e\n\u003cp\u003eThe product withstands prolonged contact with:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eSalt water, UV radiation, moisture condensation\u003c\/li\u003e\n\n\u003cli\u003eFuels, hydraulic oils, antifreeze and chemicals\u003c\/li\u003e\n\n\u003cli\u003eTemperature loads up to 300 °C (above 120 °C, visual fading may occur)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eCertification and testing:\u003c\/h3\u003e\n\u003cp\u003eBrantho-Korrux “3 in 1” has been tested and certified in accordance with:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eDIN EN ISO 12944 – corrosion protection in all 6 categories (C1 to C5)\u003c\/li\u003e\n\n\u003cli\u003eNORSOK M-501 – 4200 h test cycle (UV, salt spray, thermal loads)\u003c\/li\u003e\n\n\u003cli\u003eTÜV SÜD, DEKRA – approvals as a replacement for epoxy, PVC and red lead coatings\u003c\/li\u003e\n\n\u003cli\u003eBASt \/ TL 918300 – for use on road infrastructure projects\u003c\/li\u003e\n\n\u003cli\u003eEN 71-3 – suitable for painting toys (safe in contact with saliva\/sweat)\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eAdditional properties:\u003c\/h3\u003e\n\u003cul\u003e\n\n\u003cli\u003eColour-mixing options: unlimited combinations\u003c\/li\u003e\n\n\u003cli\u003eVarious gloss levels can be adjusted with additives\u003c\/li\u003e\n\n\u003cli\u003eAvailable in Komfortdose (aerosol) form for small surfaces\u003c\/li\u003e\n\n\u003cli\u003eSuitable for electrostatic spraying due to its conductive properties\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003ch3\u003eUnique feature – unlimited recoating:\u003c\/h3\u003e\n\u003cp\u003eBrantho-Korrux “3 in 1” can be recoated with itself any number of times, without the need to key or sand the surface. This is particularly useful:\u003c\/p\u003e\n\u003cul\u003e\n\n\u003cli\u003eFor maintenance work requiring additional protection\u003c\/li\u003e\n\n\u003cli\u003eOn projects with complex geometries where sanding is impractical\u003c\/li\u003e\n\n\u003cli\u003eIn situations requiring a flexible workflow without preparing the surface between coats\u003c\/li\u003e\n\n\n\u003c\/ul\u003e\n\u003cp\u003eThis feature sets Brantho-Korrux “3 in 1” apart from its competitors, as most alternatives require surface preparation or an intermediate coat to ensure adhesion and coating integrity.\u003c\/p\u003e\n\u003cp\u003eOther colour options are also available.\u003c\/p\u003e","brand":"Brantho-Korrux","offers":[{"title":"Default Title","offer_id":59071350210892,"sku":"01-9005-01","price":33.0,"currency_code":"EUR","in_stock":false}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/files\/product-25-bg-removed.png?v=1791369115"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/1092\/2862\/2156\/collections\/product-25-bg-removed.png?v=1791817762","url":"https:\/\/monkeyshop.lv\/en\/collections\/pretrusa.oembed","provider":"Monkey Garage","version":"1.0","type":"link"}