Owatrol Oil - Clear Universal Rust Stabilizer, 500 ml

Multi-purpose rust stabiliser and paint conditioner for oil-based coatings

OWATROL® OIL is a high-penetration, air-drying alkyd oil formulated to prevent rust, improve paint adhesion and provide long-lasting protection against the elements. The product is suitable both as a standalone protective coating and as an additive for oil- and alkyd-based paints, varnishes and stains.

Its special formula displaces air and moisture in rust, creating a stable, non-flaking surface that can be safely painted over. OWATROL® OIL also saturates dry, porous wood surfaces with oil, preventing paint from peeling and improving the finish on wood.

Product applications

OWATROL® OIL is suitable for a variety of materials and surfaces:

• Metal (rusty or new): steel structures, pipes, railings, equipment, trailers, tanks
• Wood: dry, damaged, porous surfaces, both horizontal and vertical
• Interior and exterior use

Key features and benefits

• Can be applied directly to rust without needing to clean the metal back to bright metal
• Penetrates deep into the rust layer, displacing moisture and stopping the corrosion process
• Forms a stable layer that provides excellent adhesion for paint
• Compatible with oil/alkyd-based coatings, including urethane alkyd paints
• Improves paint flow and levelling, extends the wet-edge working time, and improves adhesion in difficult conditions
• Fills wood pores with oil, preventing paint from peeling and providing long-lasting adhesion
• Heat-resistant up to 175°C once fully dry

Application on metal surfaces

• Rusty metal: Apply wet-on-wet until the surface becomes uniformly glossy. This indicates full saturation. After the first application, check for any loose flakes of rust; carefully remove them and touch up with OWATROL® OIL.
• New metal: OWATROL® OIL can be used as a primer—mix one part OWATROL® OIL with three parts alkyd primer, or apply one thin coat without mixing. Once dry, the surface can be painted with paint containing OWATROL® OIL.

Application on wood

• Wood in good condition: Prime with a mixture of OWATROL® OIL and paint primer, then apply paint mixed with OWATROL® OIL (usually 5–20% of the paint volume).
• Damaged or porous wood: Apply several coats wet-on-wet, without allowing drying time between coats. When the wood no longer absorbs the product, wipe off excess oil and allow to dry. Continue with the standard paint system, adding OWATROL® OIL.

Paint conditioning The product significantly improves the properties of oil-based paints and varnishes:

• Extends wet-edge working time
• Prevents paint from sticking, dragging and setting too quickly
• Improves paint flow and levelling, delivering a professional finish even in difficult conditions

Recommended paint mixing ratios

• Topcoat paint: 5–20% by volume
• Primers: up to 30%
• Base coat (first coat): up to 50%. These ratios can be adjusted on site depending on the condition and porosity of the surface.

Technical specifications

• Binder: alkyd
• Solvent: white spirit
• Solids content: 49% ±2%
• Density: 0.89 ±0.05 at 20°C
• Gloss level: >70%
• VOC content: up to 489 g/l
• Drying time: touch dry 12 h, fully dry 24 h, recoatable after 24–48 h
• Heat resistance: up to 175°C
• Application: by brush, roller or airless sprayer (recommended tips: 517 or 519)

Packaging options Available in various sizes: aerosol 300 ml, 500 ml, 1 L.

Safety and storage

• The product is not classified as flammable, but oil-soaked cloths may spontaneously ignite if not disposed of properly
• Store in a cool place, avoiding frost and high temperatures
• Detailed safety information is available on the manufacturer's website: