Corrosion Treatment Kit: Owatrol Oil 500 ml + Brantho-Korrux “3 in 1” 750 ml (black)

Corrosion Treatment Kit: Owatrol Oil 500ml + Brantho-Korrux “3 in 1” 750ml (black)

Professional two-step corrosion treatment system — reliable protection for restoring parts.

• Owatrol Oil | Colourless universal rust stabiliser, 500 ml. A deeply penetrating rust stabiliser that displaces moisture and air from the pores of the metal, halting oxidation. It does not restore the metal’s chemical structure, but consolidates rust from within, forming a flexible, waterproof base layer with excellent adhesion for subsequent coatings. Compatible with oil-based and synthetic coatings; dries in 12–48 h; the surface is ready for the next coat. Ideal for both light and intensive rust treatment, including in complex and hard-to-reach areas.
• Brantho-Korrux “3 in 1” | Industrial coating, 750 ml, RAL 9005 (jet black). A single-component system that works as a primer, intermediate coat and topcoat. Its high solids content provides a thicker, flexible coating that protects against UV, salt water, moisture and chemical exposure. Comfort-dose aerosol technology, excellent coverage, temperature resistance up to +175°C. Provides long-lasting mechanical durability and protects metal against cracking and peeling, even in harsh outdoor conditions.

Instructions for use

Surface preparation: remove loose rust, dirt, grease and oil, leaving a rough surface for optimum mechanical adhesion. Degrease with solvent and allow to dry completely; remove any old paint residue if necessary.

Step 1 — Owatrol Oil: apply evenly from a distance of 20–30 cm, using light overlapping passes; apply a second coat to particularly porous rust. Drying time: 12–48 h; the surface should be tacky before applying the next coat.

Step 2 — Brantho-Korrux “3 in 1”: make sure the Owatrol Oil has dried completely. Apply 2–3 thin coats or 1–2 coats in accordance with the manufacturer’s recommendations; allow each coat to dry before applying the next.

Important: Owatrol Oil and Brantho-Korrux 3in1 are fully compatible materials in this combination, but due to their flexible properties, applying filler over this coating is not recommended.

Once fully dry, Owatrol Oil and Brantho‑Korrux 3in1 provide a stable, adhesion-ready surface onto which most commercially available paints can be safely applied. If necessary, Brantho‑Korrux 3in1 can be applied in several coats without first abrading the surface.

Long-term protection

Owatrol Oil stabilises rust and provides moisture resistance, while Brantho-Korrux “3 in 1” protects against UV, salt water and mechanical stress. Ideal for vehicle chassis, industrial equipment and outdoor metal structures. Provides a flexible, crack-resistant and durable coating that delivers long-lasting protection, even in harsh weather conditions.

Additional benefit: reduces the need for regular repeat rust treatment, saving time and resources.

Certification and testing

Brantho-Korrux 3in1 and Owatrol Oil have been thoroughly tested and certified in accordance with international standards and industry requirements.

Safety, storage and maintenance

Use gloves and safety glasses, and ensure adequate ventilation; avoid open flames and heat. Store in a cool, dry place away from direct sunlight and heat. Inspect the coating after each season or exposure to mechanical stress; clean damaged areas and apply another coat.

Kit contents

• 1 x Owatrol Oil, 500 ml
• 1 x Brantho-Korrux “3 in 1”, 750 ml, RAL 9005 (jet black)

Official product websites: Brantho-Korrux “3 in 1” and OWATROL OIL